Owner's Manual
Table Of Contents
- Owner’s Guide
- Important Safety Instructions
- Contents
- Introduction
- Setting Up the System
- Operation
- F1 Model 812 Control Panel
- F1 Subwoofer Control Panel
- Power On/Off Sequence
- Setting EQ selector switches
- Connecting Sources
- Connection Scenarios
- Full band, mixing console stereo output to L/R F1 Model 812 Loudspeakers
- Full band with mixing console, one F1 Subwoofer and two F1 Model 812 Loudspeakers
- Mixing console stereo output to F1 Subwoofer and left/right F1 Model 812 Loudspeakers
- Full band with mixing console stereo output to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Stereo input to Left/right F1 Subwoofers and F1 Model 812 Loudspeakers
- Mic to F1 Model 812 Loudspeaker INPUT 1
- Mobile device to single F1 Model 812 Loudspeaker
- Mobile device to F1 Flexible Array Loudspeaker system
- Mobile device to F1 Model 812 Loudspeaker and F1 Subwoofer
- DJ Console to two F1 Subwoofers and two F1 Model 812 Loudspeakers
- Care and Maintenance
- Additional Resources
English - 7
Introduction
Applications
Straight pattern
Use the straight pattern when the
audience is standing and their
heads are approximately at the
same height as the loudspeaker.
Reverse-J pattern
The reverse-J pattern is good
for an audience in raked seating
that starts at loudspeaker height
and extends above the top of the
loudspeaker.
J pattern
The J pattern works well when
the loudspeaker is up on a raised
stage and the audience is seated
below on the floor.
C pattern
Use the C pattern for raked
seating in an auditorium when the
first row is on the floor with the
loudspeaker.
..
•
•
•
.
•
.
•
•
•
•
•
..
..
•
•
•
•
•
•
.
.
•
•
•
•
•
•
..
r . •
' : ,
:\\'
..
\)
\\,\.