User Manual

23
1. Grill removal
1.1 Remove the four Phillips-head screws
from the bottom baseplate.
1.2 Remove the three screws holding the
Grille in place.
1.3 Push down on the grille from the top to
release the tabs. Then pull outward from the
bottom.
DISASSEMBLY PROCEDURE
1.3 Disconnect the flex cable from the
display board and remove the grille.
! Important Note: Take ESD precautions
when connecting or disconnecting the OLED
display. Refer to page 5 for ESD precautions.
Important Note: The display assembly must
be replaced with the display assembly listed
in the main part list. There are different
OLEDs that need to match the display PCB.
The display assembly listed in the main part
list uses a matched OLED and display PCB.
2. Rear Cover Removal
2.1 Remove the three screws holding the
rear cover in place.