SOUNDTOUCH 300 SOUNDBAR ® OW N E R ’ S G U I D E • B R U G E RV E J L E D N I N G BEDIENUNGSANLEITUNG • GEBRUIKERSHANDLEIDING G U Í A D E L U S U A R I O • K ÄY T TÖ O H J E • N OT I C E D ’ U T I L I S AT I O N M A N U A L E D I I S T R U Z I O N I • K E Z E L É S I Ú T M U TAT Ó B R U K E RV E I L E D N I N G • P O D R Ę C Z N I K U Ż Y T KOW N I KA M A N U A L D O P R O P R I E TÁ R I O • B R U K S A N V I S N I N G
I M P O R TA N T S A F E T Y I N S T R U C T I O N S Please read and keep all safety and use instructions. Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
I M P O R TA N T S A F E T Y I N S T R U C T I O N S WARNINGS/CAUTIONS This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock. This symbol on the product means there are important operating and maintenance instructions in this guide. This product contains a tempered glass surface. Use caution to avoid impact. In the event of breakage, use care in handling broken glass.
R E G U L AT O R Y I N F O R M AT I O N NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R E G U L AT O R Y I N F O R M AT I O N Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs X O O O O O Metal Parts X O O O O O Plastic Parts O O O O O O Speakers X O O O O O Cables X O O O O O Part Name This table is prepared in accordance with the provisions of SJ/T 11364.
CONTENTS Getting Started Building your entertainment system.......................................................................... 9 Unpacking............................................................................................................................. 9 Placement guidelines....................................................................................................... 10 Mounting the soundbar......................................................................................
CONTENTS Setting Up SoundTouch® Download and install the SoundTouch® app........................................................... 24 SoundTouch® Owner’s Center....................................................................................... 25 Add the soundbar to an existing account................................................................ 25 Connect the soundbar to a new network................................................................. 25 Using the SoundTouch® App Setting a preset..
CONTENTS Getting System Information System status indicators................................................................................................. 36 Wi-Fi® indicator TV indicator .................................................................................................. 36 ........................................................................................................ 36 SoundTouch® indicator Bluetooth indicator .................................................................
G E T T I N G S TA R T E D Building your entertainment system The SoundTouch® 300 soundbar is part of a modular home entertainment s ystem, and is compatible with the optional Acoustimass® 300 wireless bass module and Virtually Invisible® 300 wireless surround speakers (not provided). You can wirelessly pair the bass module and surround speakers to the soundbar at any time for even richer, more immersive sound.
G E T T I N G S TA R T E D Placement guidelines To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from the system. Place the system outside and away from metal cabinets, other audio/video components and direct heat sources. • Place the soundbar directly below (preferred) or above your TV with the speaker grille facing into the room. • Place the soundbar on its rubber feet on a stable and level surface. For proper support, both feet must be resting on the surface.
G E T T I N G S TA R T E D Mounting the soundbar You can mount the soundbar on a wall. To purchase the WB-300 wall bracket, contact your local Bose® dealer or visit www.Bose.com CAUTION: Do not use any other hardware to mount the soundbar.
SETTING UP THE SOUNDBAR Cable options Connect the soundbar to your TV using one of two cable options: • Option 1: HDMI™ ARC (preferred) • Option 2: Optical Note: The preferred option is to connect the soundbar to your TV’s HDMI ARC or Audio Return Channel connector using the HDMI cable. 1. On the back of your TV, locate the HDMI IN and Audio OUT (digital) connector panels. Your TV’s connector panel may not appear as shown. Look for the shape of the connector.
SETTING UP THE SOUNDBAR Connecting the soundbar to your TV After choosing an audio cable, connect the soundbar to your TV. Option 1: HDMI™ ARC (preferred) 1. Insert one end of the HDMI™ cable into your TV’s HDMI ARC connector. Note: If you don’t connect to your TV’s HDMI ARC or Audio Return Channel connector, you won’t hear audio from the soundbar. If your TV does not have an HDMI ARC connector, see “Option 2: Optical” on page 14. 2.
SETTING UP THE SOUNDBAR Option 2: Optical If your TV doesn’t have an HDMI™ ARC connector, use the optical cable to connect the soundbar to your TV. CAUTION: Make sure you have removed the protective cap from both ends of the optical cable. Inserting the plug in the wrong orientation can damage the plug and/or the connector. 1. Insert one end of the optical cable into your TV’s Optical OUT connector. 2. Hold the plug at the other end of the optical cable with the Bose® logo facing down. 3.
SETTING UP THE SOUNDBAR Connecting to power 1. Plug one end of the power cord into the soundbar. connector on the back of the 2. Plug the other end of the power cord into a live AC (mains) outlet.
SETTING UP THE SOUNDBAR Installing the remote control’s batteries 1. Slide open the battery compartment cover on the back of the remote control. 2. Insert the two provided AAA (IEC-LR3) 1.5V batteries. Match the + and – symbols on the batteries with the + and – markings inside the compartment. 3. Slide the battery compartment cover back into place. Powering on the soundbar On the remote control, press to power on the soundbar. The soundbar powers on.
SETTING UP THE SOUNDBAR Pairing the soundbar with a bass module or surround speakers (optional) If you’ve purchased the optional Acoustimass® 300 wireless bass module or Virtually Invisible® 300 wireless surround speakers, you can wirelessly pair them with the soundbar now or later. Notes: • Pairing now instead of later prevents you from having to repeat certain steps, such as running ADAPTiQ® audio calibration. • You’ll need to pair the bass module and surround speakers separately. 1.
FINISHING SOUNDBAR SETUP Turning off your TV speakers To avoid hearing distorted audio, turn off your TV speakers. Refer to your TV owner’s guide for more information. Checking for sound 1. Power on your TV. 2. If you are using a cable/satellite box or other secondary source: • Power on this source. • If your secondary source is connected to your TV, select the appropriate TV input. If you have not programmed the remote control, you may need to use a different remote. 3. Power on the soundbar.
FINISHING SOUNDBAR SETUP About ADAPTiQ® audio calibration After setting up your soundbar and pairing the optional bass module or surround speakers, run ADAPTiQ® audio calibration for best acoustic performance. ADAPTiQ audio calibration customizes the sound of the soundbar to the acoustics of your listening area by taking five audio measurements. To run an audio calibration, you need 10 minutes when the room is quiet.
FINISHING SOUNDBAR SETUP 4. Press and hold until the TV indicator soundbar glow green. and the B luetooth indicator on the 1 2 The ADAPTiQ® process begins. Note: If you don’t hear your language, press and on the navigation pad (see page 21) to cycle through languages. To reset the language, press and hold for 10 seconds. 5. Follow the voice prompts until the ADAPTiQ process is complete.
S E T T I N G U P T H E U N I V E R SA L R E M OT E CO N T R O L Universal remote control buttons Use the remote control to control sources connected to your TV or soundbar, adjust the volume and bass, change channels, use dialogue mode, use playback functions and enable cable/satellite box functions.
S E T T I N G U P T H E U N I V E R SA L R E M OT E CO N T R O L Programming the universal remote control The universal remote control has four programmable source buttons ( , , and ). You can program these buttons to control your TV, cable/satellite box, DVD or Blu-ray Disc™ player, game system, DVR or other auxiliary source by entering the code for your source’s brand. There may be several codes for your source. You may need to perform this procedure multiple times to locate the correct code.
S E T T I N G U P T H E U N I V E R SA L R E M OT E CO N T R O L Customizing the power button You can customize the power button on your remote control to power on/off your soundbar, TV and another source simultaneously. 1. Program your remote control to control your TV and source (see page 22). 2. Press and hold and the appropriate source button simultaneously for 10 seconds until both buttons flash three times.
S E T T I N G U P S O U N DTO U C H ® The SoundTouch® app lets you set up and control SoundTouch® from your smartphone, tablet or computer. Using the app, your smart device acts as a remote for the soundbar. From the app, you can manage your SoundTouch® settings, add music services, explore local and global Internet radio stations, set and change presets and stream music. New features are added periodically.
S E T T I N G U P S O U N DTO U C H ® SoundTouch® Owner’s Center global.Bose.com/Support/ST300 This website provides access to the owner support center, which includes: owner’s manuals, articles, tips, tutorials, a video library, and the owner community where you can post questions and answers. Add the soundbar to an existing account If you have already set up SoundTouch® on another speaker, you do not need to download the SoundTouch® app again.
U S I N G T H E S O U N DTO U C H ® A P P You can personalize six presets to your favorite streaming music services, stations, playlists, artists, albums or songs from your music library. You can access your music, at any time, with a simple touch of a button using the SoundTouch® app. Before using presets, note the following: • You can set presets from the app and the remote control.
U S I N G T H E S O U N DTO U C H ® A P P Playing a preset Once you personalize your presets, press a preset on the remote control to play music. 1. On the remote control, press the SoundTouch® button . 2. Press a preset (1 – 6) on the remote control to play that preset. 1 2 Note: If you don’t hear music and the SoundTouch® indicator on the soundbar double blinks amber, see “Setting a preset” on page 26.
USING THE SOUNDBAR Source selection You can switch between sources by selecting different inputs on your TV using the remote control. For information on connecting to a device paired via Bluetooth, see page 34. Notes: • Before you begin, make sure you have correctly programmed the remote control to control your sources (see page 22). • Pressing , , or on the remote control does not switch the source.
USING THE SOUNDBAR Adjusting the bass setting You can adjust the soundbar’s bass setting using the SoundTouch® app or the remote control. For details on the SoundTouch® app, see page 24. 1. On the remote control, press . The indicators on the soundbar glow to show the current bass setting, as shown below. Bass setting Indicator activity +4 +3 +2 +1 0 (default) -1 -2 -3 -4 2. On the remote control: • Press to increase the bass. • Press to decrease the bass. 3. Press .
USING THE SOUNDBAR Function buttons The red, green, yellow and blue buttons on the remote control correspond with the color-coded function buttons on your cable/satellite box or teletext functions. • Cable/satellite box functions: refer to your cable/satellite box owner’s guide. • Teletext functions: correspond with color-coded page numbers, headings or shortcuts on a teletext display.
B LU E T O OT H T E C H N O LO G Y Bluetooth wireless technology lets you stream music from mobile devices such as smartphones, tablets and laptop computers. Before you can stream music from a mobile device, you must pair the mobile device with the soundbar. Choosing your pairing method You can pair your mobile device with the soundbar using Bluetooth wireless technology or Near Field Communication (NFC).
B LU E T O OT H T E C H N O LO G Y Pairing your mobile device 1. On the remote control, press and hold the Bluetooth button indicator on the soundbar blinks blue. until the B luetooth 2. On your mobile device, turn on the Bluetooth feature. Tip: The Bluetooth feature is usually found in the Settings menu. 3. Select your SoundTouch® soundbar from the device list. Once paired, on the soundbar glows solid white, the soundbar emits a tone and the system’s name appears connected in the device list.
B LU E T O OT H T E C H N O LO G Y Pairing your mobile device with NFC 1. With the soundbar powered on, unlock your mobile device and turn on the Bluetooth and NFC features. Refer to your mobile device owner’s guide to learn more about these features. 2. Gently tap the NFC touchpoint on your mobile device to the top of the soundbar behind the Bose® logo. Your mobile device may prompt you to accept pairing. Once paired, the Bluetooth indicator soundbar emits a tone.
B LU E T O OT H T E C H N O LO G Y Connecting to a paired device You can stream audio from a mobile device to the soundbar. Note: If there are multiple mobile devices stored in the soundbar’s pairing list, it may take a m inute or two for the paired device to connect. The soundbar’s Bluetooth indicator shows connection status (see page 36). 1. On the remote control, press the Bluetooth button . The soundbar connects to the last mobile device that streamed to the soundbar. 2.
B LU E T O OT H T E C H N O LO G Y Reconnecting a mobile device • When powered on, the soundbar tries to reconnect with the most recently-connected mobile device. Note: The mobile device must be within range and powered on. • If your mobile device supports NFC, tap the NFC touchpoint on your mobile device to the top of the soundbar behind the Bose® logo. Clearing the soundbar’s pairing list You can store up to eight paired mobile devices in the soundbar’s pairing list. 1.
G E T T I N G S Y S T E M I N F O R M AT I O N System status indicators The front of the soundbar has a series of indicators that show system status. Wi-Fi indicator Shows the Wi-Fi connection status of the system.
G E T T I N G S Y S T E M I N F O R M AT I O N SoundTouch® indicator Indicator activity System state Blinking white Connecting to a SoundTouch® source Solid white System is playing a SoundTouch® source Solid amber • • • • Double blink amber • Preset empty • Skip limit reached Solid green SoundTouch® is selected as the current source and dialogue mode is enabled Double blink green SoundTouch® is selected as the current source and persistent dialogue mode is enabled.
A D VA N C E D F E AT U R E S Updating system software The SoundTouch® app alerts you when a software update is available for the soundbar. You can update the system software using the app or the remote control. 1. On the remote control, press the SoundTouch® button . 2. Press and hold the Closed Captioning button until the Wi-Fi indicator , TV indicator , SoundTouch® indicator and Bluetooth indicator on the soundbar blink white. The soundbar restarts when the update is complete.
A D VA N C E D F E AT U R E S Disabling Wi-Fi capability Disabling Wi-Fi also disables the Bluetooth feature. 1. On the remote control, press the SoundTouch® button . 2. Press and hold until the Wi-Fi indicator , TV indicator , SoundTouch® indicator and Bluetooth indicator on the soundbar blink white. When Wi-Fi is disabled, on the soundbar turns off. Re-enabling Wi-Fi capability Re-enabling Wi-Fi also re-enables the Bluetooth feature. 1. On the remote control, press the SoundTouch® button 2.
A D VA N C E D F E AT U R E S Resetting the soundbar Factory reset clears all source, volume, network and ADAPTiQ® audio calibration settings from the soundbar and returns it to original factory settings. 1. On the remote control, press the SoundTouch® button . 2. Press and hold the TeleText button for 10 seconds until the Wi-Fi indicator TV indicator , SoundTouch® indicator and B luetooth indicator on the soundbar blink white. The soundbar restarts and reset is complete.
A LT E R N AT E S E T U P Alternate setup methods You may need to use an alternate setup method to resolve the following problems: Symptom Solution No available HDMI™ inputs on your TV for sources Follow the instructions for “Connecting a source to the soundbar” on page 41. No sound or poor sound quality from a source c onnected to your TV Follow the instructions for “Playing audio directly from a source connected to the soundbar” on page 42.
A LT E R N AT E S E T U P Playing audio directly from a source c onnected to the soundbar Some TVs don’t deliver audio from connected sources to the soundbar. Other TVs reduce the quality of surround sound audio from connected s ources before delivering it to the soundbar. This can cause you to hear no sound or poor sound quality from a source c onnected to your TV.
A LT E R N AT E S E T U P Setting up your soundbar using a computer You can set up your soundbar using a computer rather than a smartphone or tablet. Before you begin • Position your soundbar next to your computer. • Make sure your computer is on your Wi-Fi network. • Obtain a USB A to USB Micro B cable (not provided). Notes: • A USB A to USB Micro B cable is commonly used for charging mobile devices. You can also purchase this part at your local electronics store.
CARE AND MAINTENANCE Cleaning Do not allow liquids to spill onto the system or into any openings. • Clean the exterior of the system with the provided cleaning cloth or another soft, dry cloth. • Do not use any sprays near the system. • Do not use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives. • Do not allow objects to drop into any openings. Customer service For additional help using the system: • Visit global.Bose.
T R O U B L E S H O OT I N G If you experience problems with your soundbar: • Connect the soundbar and optional bass module or surround speakers to AC (mains) power. • Secure all cables. • Verify the state of the system status indicators (see page 36). • Move the soundbar and optional bass module or surround speakers away from possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).
T R O U B L E S H O OT I N G Symptom Solution Soundbar doesn’t pair with Acoustimass® 300 wireless bass module or Virtually Invisible® 300 wireless surround speakers • Unplug the power cords for the soundbar, bass module and surround speakers, wait 15 seconds and plug them firmly into a live AC (mains) outlet. • Repeat the pairing process (see page 17). • Connect the bass module to the soundbar using a 3.5 mm stereo cable (refer to the Acoustimass® 300 owner’s guide online). If you don’t have a 3.
T R O U B L E S H O OT I N G Symptom Solution Sound is coming from your TV speaker • Make sure that the soundbar’s HDMI cable is inserted into a connector on your TV labeled ARC or Audio Return Channel. If your TV does not have an HDMI ARC connector, connect to the soundbar using the optical cable (see page 14). • Turn off your TV speakers (refer to your TV owner’s guide).
T R O U B L E S H O OT I N G Symptom Solution No video from a source c onnected to the soundbar’s HDMI IN c onnector • Select the TV input to which the soundbar is connected (see page 28). • Make sure that the soundbar’s HDMI cable is inserted into a connector on your TV labeled ARC or Audio Return Channel. Do not plug a source into the soundbar’s HDMI IN connector when connecting to your TV using the optical cable.
T R O U B L E S H O OT I N G ADAPTiQ® audio calibration error messages Listen to the voice prompts for the following error messages: Error message Problem What to do 1 The microphone on the ADAPTiQ® headset cannot detect sound • Secure all cables. • Disconnect the ADAPTiQ headset cable and reconnect it firmly into the soundbar’s ADAPTiQ connector. • Make sure the microphone opening on the top of ADAPTiQ headset is not blocked. • Your ADAPTiQ headset may be damaged.
global.Bose.com/Support/ST300 ©2016 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM773965 Rev.
Please read and keep all safety and use instructions. • Lea y conserve todas las instrucciones de uso y seguridad. • Lisez toutes les consignes de securite et les instructions d'utilisation, et conservez-les en lieu sur.
• Place the soundbar Keep at least 1 - 3 ft. (0.3 - 0.9 m) away from other wireless equipment.
Choose an audio cable Option 1 (Preferred): HDMI™ ARC Option 2: Optical If your TV has an HDMI™ ARC connector, connect the HDMI cable to your TV's HDMI ARC connector and the sound bar's HDMI OUT TO TV (ARC) connector. If your TV doesn't have an HDMI ARC connector, connect the optical cable to your TV's Optical OUT connector and the sound bar's OPTICAL IN connector. Tip: You may need to enable CEC in your TV's system menu to hear audio from the HDMI ARC connector.
Connect to power Power on the soundbar On the remote control, press <.0. The sound bar powers on. NOTE: If you hear distorted audio, turn off your TV's speakers (refer to your TV owner's guide).
• Set up ADAPT iQ®audio calibra tion Run ADAPT iQ®audio calibra tion 1. Put on the ADAPTiQ ®headset. 2. Plug the headset into the sound bar. 1. On the remote control, press ~. 2. Press and hold 8 until D and* on the sound bar glow green. NOTE: To cycle through languages, press " and ~ on the navigatio n pad.
) GET IT ON ,, Google Play Ell ~ -~,;Ps Available at amazon ""'' Download the SoundTouch®Controller app* Program the remote control Download the app to play streaming music, set Presets and access music services through the sound bar. Refer to the Universal Remote Control Setup Guide (provided) for instructions on programming and using the remote to control your sources. *If using a computer go to globai.Bose.c om/Support/S T300 to download the app. Have questions? globai.Bose.
glob aI. Bose.com/Su pport/ST300 Better sound through research® @2016 Bose Corporation, The Mountain, Framingham, MA, 01701-9168 USA AM773957 Rev.
BOSE'' ® universal remote control SETU P c; U i D E • c; U f .A D E C () f\,] F I e.; U i~ .A C I C) >~ • c; U I D E D , I ~< S ·r .A L L ,b.
CONTEN TS Program ming the Universal Remote Control..... 3 Using the Remote Control Universal remote control buttons ................................................ 4 Source selection ................................................................................... 4 Universal Remote Control Device Codes TV ............................................................................................................... 6 Cable ..............................................................................
PROGRAMMING THE UNIVERSAL REMOTE CONTROL The universal remote control has four programmable source buttons Test the code your TV, cable/satellite box, DVD or Blu-ray Disc™ player, game system, DVR or other auxiliary source by entering the code for your source's brand. There may be several codes for your source. You may need to perform this procedure multiple times to locate the correct code. 1. (0, AUX, E::l and~).
USING THE REMOTE CONTROL Universal remote control buttons Powers on/off a Powers on/off _________________ --[ lsou~:~,--~-j- ----------· selected source 0 the sound bar ·--------~---~N:~~-~- ----1 . HAUX I ;r I * ): : Selects a source Source select1on --------------- l[ 0 1 ~ 1 cs J! ~-----connected to Function buttons-------------- ~~D~~~~~~~ [MENuiiGtnoeiiiNFO J EXIT Displays the Internet TV home page or the current source's ·-----; home menu : . ~--- ______ .
BLUETOOTH® TECHNOLOGY To stream music from your 8/uetooth@ phone or other mobile device, you must pair your mobile device with the sound bar. Pairing a mobile device with NFC Note: For more information on using 8/uetooth@ functions, refer to the owner's guide at globai.Bose.com/Support/ST300 1. Pairing a mobile device 2. Gently tap the NFC touchpoint on your mobile device to the top of the sound bar behind the Bose@ logo. 1.
UNIVERSAL REMOTE CONTROL DEVICE CODES Blue Light ......................................... 06152 Digitrex ............................................ 01808 Frigidaire .......................................... 01794 Blue Sky ........................................... 00134 Disney .............................................. 02440 Funai ..................................................00179 888 .................................................... 02250 Bluesky ....................................
UNIVERSAL REMOTE CONTROL DEVICE CODES iLo ...................................................... 02464 LodgingStar ................................... 04868 New Acoustic Dimension ............ 05601 Planar ............................................... 03573 lmperiai ............................................ 00387 LXI ..................................................... 00148 NEX ................................................... 03694 Polaroid .............................................
UNIVERSAL REMOTE CONTROL DEVICE CODES Sceptre .............................................. 02541 Supersonic ...................................... 02544 VisionQuest ................................... 04494 Scotch .............................................. 00855 Suzuki ............................................... 08893 VIZIO .................................................. 02215 Scott ................................................ 00309 Suzuki Time .....................................
UNIVERSAL REMOTE CONTROL DEVICE CODES Cablevisi6n Argentina .................. 10396 Director ............................................. 01707 Inter Mountain Cable .................... 05053 Movistar ........................................... 04534 Cablevisi6n Mexico ........................ 10395 DMT .................................................... 01749 lzzi Telecom ...................................... 10174 Moxi ...................................................
UNIVERSAL REMOTE CONTROL DEVICE CODES Prime ................................................ 03964 Technotrend ................................... 02228 Wegener ........................................... 03821 Bell Satellite TV .............................. 08079 RCN ................................................... 04377 TeleCable ........................................ 04498 WEHCO Video ................................. 06174 brite-View .......................................
UNIVERSA L REMOTE CONTROL DEVICE CODES HTS ................................................... 00682 Odobo .............................................. 07984 Tele Red ............................................ 04721 Apex Digitai ..................................... 01550 Huawei ............................................ 04700 Oi TV ................................................. 06031 Telefonica ....................................... 02406 Asahi .............................................
UNIVE RSAL REMOT E CONTR OL DEVIC E CODES Digix ................................................... 02441 Insignia .............................................. 02471 On kyo ............................................... 00102 Sharp ............................................... 00093 Diplomat .......................................... 08683 Integra ............................................... 01842 Oppo ................................................. 02634 Sherwood ..........................
UNIVERSA L REMOTE CONTROL DEVICE CODES Xbox .................................................. 01840 Integra ............................................... 01842 QED .................................................. 00884 Alienware ........................................ 02082 Yamaha .................................... .. ...... 00019 Kenwood ......................................... 00417 Quad ................................................. 00601 CyberPower ....................................
UNIVERSA L REMOTE CONTROL DEVICE CODES Tagar Systems ................................ 02087 Olive .................................................. 03342 Auralic ................................................ 10122 Kaleidescape ................................... 03215 TiVo .................................................... 01492 Philips ............................................... 00081 Boxee ................................................ 04583 LaCie .......................................
UNIVERSAL REMOTE CONTROL DEVICE CODES ---------------------------------------------------------------------------------------------------------------------------------------------------Patriot.. .............................................. 01338 Xtreamer ......................................... 04420 Pivos ................................................. 09120 Yamaha ............................................ 00019 Popcorn Hour ................................. 03862 ZT Group ...................
111111111111 774092-0010 I (c)2016 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM 774092 Rev.
SOUND TOUCH ®300 SOUND BAR Important Safety Instructions Vigtige sikkerhedsinstruk tioner Wichtige Sicherheitshinwei se Belangrijke veiligheidsinstruc ties lnstrucciones importantes de seguridad Tarkeita turvallisuusohjeit a Instructions importantes relatives a Ia securite lmportanti istruzioni di sicurezza Fontos biztonsagi utasitasok Viktige sikkerhetsinstruks joner Wazne zalecenia dotyczctce bezpieczenstwa lnstru~oes de seguran~a importantes Viktiga sakerhetsanvisnin gar ~1tt"~"1~1\-I,A113Juae~nufid,~r
ENGLISH WARNINGS/CAUTIONS: Please read and keep all safety and use instructions. Important Safety Instructions Refer to the owner's guide (online) for more information about your sound bar (including accessories and replacement parts). To request a printed copy, use the phone numbers provided. Owner's Guide: globai.Bose.com/Support/ST300 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.
Management Regulation for Low-power Radio-frequency Devices Article XII According to "Management Regulation for Low-power Radio-frequency Devices" without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
globai.Bose.com/Support/ST300 780737-0010 ©2016 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM780737 Rev.
globai.Bose.com/Support/ST300 United States ........................ 1-877-230-5639 China .................................... 86 400 880 2266 Ireland ............................................1800656751 Poland ................................. (48) 22-853-0031 Australia ..................................... 1800 061 046 Colombia ........................... 01-800-5-1-83962 Italy .............................................. 800 83 22 77 Sweden ...........................................
Warranty information inside Register your product now Contiene informaciOn sabre Ia garantfa Registre su producto ahora Renseignements sur Ia garantie a l'int€rieur Enregistrez votre produit des maintenant
Registre su producto: Conozca toda Ia gama de servicios que su garantia le ofrece. Registrarse en lfnea es facil y rapido. Globai.Bose.com/register Enlace directo para registrarse: www.register.Bose.eu (Europa) www.Bose.com/register (EE.UU., Puerto Rico e Islas Vfrgenes de EE. UU.) L'enregistrement en ligne est simple et rapide. Globai.Bose.com/register www.Bose.com.au/warranty (Australia) www.Bose.ca/register (Canada) www.Bose.co.
Register your product: Learn about the full range of services your warranty provides. Registering online is quick and easy! Global. Bose. com/register To link directly to registration: www.register.Bose.eu (Europe) www.Bose.com/register (US, PR &USVlj www. Bose .com .au/warranty (Australia) www.Bose.ca/register (Canada) www.Bose.co.