User's Manual

System Setup

English - 15

Connecting the T4S/T8S to Your Computer

The T4S/T8S provides a USB port for connecting it to a computer. This allows you to download performance

scenes to a computer or install system updates. Visit www.Bose.com/livesound for details on updating your

system.

When connected to a computer, you also can use the T4S/T8S as a general-purpose USB audio device for

recording/playback.

Note: The T4S/T8S operates at 48 kHz/24-bit. When using the T4S/T8S with recording software, you may

need to conﬁgure the software settings for 48 kHz/24-bit operation.

Note: Connecting the T4S/T8S to your computer requires a USB cable (Type A to Type B, not supplied).

1. Connect the mixer to a power source (ToneMatch® power supply for T4S/T8S or an L1 Model 1S/II for T4S only).

2. Plug one end of the USB cable into the mixer's USB 2.0 Type-B port (Figure 12).

3. Plug the other end of the USB cable into a USB port on your computer.

4. Turn on the mixer.

Figure 12. T4S-to-USB connection

ToneMatch port – To an L1 Model 1S/II

system or an ToneMatch power supply

Power switch

USB cable

(Type A to Type B)

To computer

USB port

Connecting a Flash Drive to the T4S/T8S

Plug in a USB 2.0/3.0 ﬂash drive loaded with WAV/MP3 ﬁles into the USB 2.0 Type-A port to playback audio

tracks to your mixer.

Figure 13. Connecting a ﬂash drive to the T4S