User's Manual

18 - English

Operation

Using the Master Volume Control

The Master volume control adjusts the overall output level of the T4S/T8S ToneMatch® output and analog

Master output. During normal operation, it is recommended to keep the Master control set at the 12 o’clock

position. Once you have set volume levels for all channels, you can adjust the Master volume up or down from

this position.

Muting a Channel

The Mute buttons silence the audio for the respective channel.

• To mute a channel, press the Mute button once. The Mute button glows white to indicate that the channel is

muted. “CH MUTE” will appear on the display for the respective channel.

• Press the Mute button again to unmute the channel. The Mute button dims to indicate that the channel is not

muted.

Muting Channel Eects

The FX Mute buttons mute only the Mod, Delay, and Reverb eects on the respective channel. Muting eects

does not bypass ToneMatch presets, zEQ, Para EQ, and Comp/Gate settings.

• To mute eects on a channel, press the FX Mute button once. The FX Mute button glows white to indicate

that the channel eects are muted. “FX MUTE” will appear on the display for the respective channel.

• Press the FX Mute button again to unmute the channel eects. The FX Mute button dims to indicate that the

channel eects are not muted.

Ch 1