User's Manual

28 - English

Operation

Using the Prefs Utilities

The Prefs function allows access to several system utilities.

1. Select Prefs with the rotary selector.

2. Rotate the Menu control to scroll through the list and highlight the desired utility. Press the Select control

to display the utility:

• Status – Displays the eects assigned to input channels (viewable only).

• Input Level – Displays input level meters with peak signal indicators for all input channels. Press the

Reset control to reset all peak signal indicators. This display is helpful in setting the channel input trim

level (see “Optimizing Input Gain and Output Volume” on page 17). Press the Aux In control to monitor

the level of the auxiliary inputs (For the T8S only, press the Ch 5-8 control to monitor the level of

Inputs5-8).

• Output Level – Displays output level meters for all outputs: Main L, Main R, USB L, and USB R. Press the

Aux control to monitor the level of the auxiliary outputs.

Output Level Preferences

USB L

Main L

Main R

USB R

Menu Rese

Status

Ch 1 Mod

Mod

Mod Dly

Rev

CmpCh 2

Ch 3

Ch 4

Preferences

Cmp = Compressor/Gate

Mod = Modulation

Dly = Delay

Rev = Reverb

Input LevelPreferences

Ch 3

Ch 1

Ch 2

Ch 4

Menu Aux InReset

Peak level indicator

Input level indicator