Owner’s Guide NOISE-MASKING SLEEPBUDS ™
IM P ORTA N T SA F ET Y I N ST R U C T I O N S Please read and keep all safety and use instructions. Important Safety Instructions 1. T o avoid accidental ingestion, keep the sleepbuds™ away from children and pets. The sleepbuds™ contain a silver-zinc battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When not in use, store the sleepbuds™ in the charging case with the charging lid closed, and keep out of the reach of children and pets. 2.
IM P ORTA N T SA F ET Y I N ST R U C T I O N S Contains small parts which may be a choking hazard. Not suitable for children under age 3. This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. • Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product. • Keep the product away from fire and heat sources.
R EG U L ATORY I N FORMAT I O N NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R EG U L ATORY I N FORMAT I O N Please dispose of used batteries properly, following local regulations. Do not incinerate. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment.
R EG U L ATORY I N FORMAT I O N Please complete and retain for your records The serial number is located on the bottom of the charging case. Serial number: _____________________________________________________________________ Model number: 424611 Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product. You can easily do this by going to http://global.Bose.
CON T EN TS BOSE® SLEEP APP Features............................................................................................................................... 9 STAY AWARE OF YOUR SURROUNDINGS Set an appropriate volume.......................................................................................... 10 Tips for maintaining awareness.................................................................................. 10 Basic tips..................................................................
CON T EN TS SLEEPBUDS™ STATUS Sleepbuds™ charging lights......................................................................................... 22 Charging case battery lights....................................................................................... 23 BLUETOOTH® CONNECTIONS Connect your mobile device....................................................................................... 24 Disconnect a mobile device............................................................................
BOSE ® SL EEP AP P Download the free Bose Sleep app, which you’ll need to control your sleepbuds™, select masking sounds, manage wake-up alarms, adjust volume and configure advanced settings. FEATURES Select masking sounds to play through your sleepbuds™. Set wake-up alarms. Name your sleepbuds™. Find answers to frequently asked questions. Keep your sleepbuds™ up to date and try new features with the latest software.
STAY AWA R E OF YOUR SU R R O U N D I N G S The sleepbuds™ are designed to mask noise and disturbances while you sleep. Because of this, they can affect your ability to hear other sounds, such as alarms, warning systems, people and pets. SET AN APPROPRIATE VOLUME To balance the levels of noise masking and awareness you want, set an appropriate volume level for your needs.
W HAT’S IN T HE CARTO N CONTENTS Confirm that the following parts are included: Noise-masking sleepbuds™ Portable charging case Travel bag StayHear®+ Sleep tips: Large (black) and small (white) USB power supply USB cable NOTE: Medium (gray) tips are attached to the sleepbuds™. NOTE: If any part of your product is damaged, do not use it. Contact Bose customer service. Visit: global.Bose.
CON TR OL S OPEN THE CHARGING CASE With the Bose® logo facing you, slide the lid of the charging case away from you to open. Lights on the inside rim of the case show the status of each sleepbud™, the case battery level and the case charging status (see page 22).
Controls POWER ON 1. Open the charging case (see page 12). 2. Wait for the sleepbuds™ charging lights to slowly blink white (see page 22), then remove the sleepbuds™ from the case.
Controls POWER OFF 1. Place the sleepbuds™ in the charging case. For information on how to properly store the sleepbuds™, see “Charge the sleepbuds™” on page 18. 2. Wait for the sleepbuds™ charging lights to slowly blink white (see page 22), then close the case.
SECU R E F I T CHOOSE THE CORRECT STAYHEAR®+ SLEEP TIPS For optimal noise masking and stability, it is important to choose the correct size StayHear+ Sleep tip. Select the size that gives you the best comfort and fit in each ear. To determine the best fit, you may need to try all three sizes. You may need a d ifferent size for each ear. NOTE: To test the fit of your current StayHear+ Sleep tip size, see page 16. Each sleepbud™ and StayHear+ Sleep tip is marked with either an L or an R.
S ecure F it CHECK YOUR STAYHEAR®+ SLEEP TIP SIZE To check if your current StayHear+ Sleep tip size is right for you, use a mirror or ask a friend to compare your fit to the size guide below. The tip wing should fit securely under your ear ridge without being compressed. Proper fit Too big Too small In addition, try the following: Try speaking aloud. Your voice should sound muffled in both ears. Shake your head. The sleepbuds™ should stay secure.
S ecure F it CHANGE THE STAYHEAR®+ SLEEP TIPS 1. Holding the base of the attached StayHear+ Sleep tip, peel the tip back and gently slide the sleepbud™ out of the tip. 2. Align the raised line near the opening of the new StayHear+ Sleep tip with the groove on the nozzle on the sleepbud™. Slide the nozzle into the opening. Then, gently stretch the base of the tip around the back of the sleepbud™ to hold the sleepbud™ in place.
BAT T ERY CHARGE THE SLEEPBUDS™ The sleepbuds™ charge while they are in the charging case. 1. Align the charging contacts on the right sleepbud™ with the charging pins on the right side of the case. Charging contacts Charging pins 2. Place the sleepbud™ in the case until it magnetically snaps into place. The charging light for the right sleepbud™ blinks white.
Battery 3. Repeat steps 1 and 2 to charge the left sleepbud™. 4. Wait for the sleepbuds™ charging lights to slowly blink white, then close the case. Charging time Allow up to eight hours to fully charge the sleepbuds™. NOTE: A full charge allows up to 16 hours of use. Check the battery levels of the sleepbuds™ You can check the battery levels of the sleepbuds™ while using or charging the sleepbuds™.
Battery CHARGE THE CASE The charging case stores and charges your sleepbuds™ while you’re not using them. NOTES: Keep the case connected to AC (mains) power when possible to make sure that your sleepbuds™ are always fully charged. You can also use the case b attery to charge the sleepbuds™ while traveling. Before charging, make sure the sleepbuds™ are at room temperature, between 41° F (5° C) and 113° F (45° C). 1. Connect the small end of the USB cable to the USB connector on the back of the case. 2.
Battery Check the case battery level Open the lid of the charging case (see page 12). The case battery lights glow as follows: If five lights glow solid, the case battery is fully charged. If only one light glows solid, the case battery is low. Charge the case battery (see page 20). Case battery lights For more information, see “Charging case battery lights” on page 23. BATTERY PROTECTION The battery protection feature conserves the batteries of the sleepbuds™ when the case battery becomes depleted.
SL EEP BUDS™ STAT U S SLEEPBUDS™ CHARGING LIGHTS Shows the charging status of each sleepbud™. The charging lights are located on the inside rim of the charging case next to the sleepbuds™. Left charging light LIGHT ACTIVITY Right charging light CHARGING STATUS Waking up or going to sleep. Blinking white Do NOT remove the sleepbuds™ from the case or close the case during this state. Slowly blinking white Charging. Solid white Fully charged.
Sleepbuds ™ status CHARGING CASE BATTERY LIGHTS Shows the battery level and charging status of the charging case. Five battery lights are located on the inside front rim of the case. Case battery lights LIGHT ACTIVITY CHARGING PERCENTAGE 0% – 20% 20% – 40% 40% – 60% 60% – 80% 80% – 100% Charging error. Reset the charging case (see page 25). If the error persists, contact Bose customer service. NOTES: • When charging, the last lit battery light blinks white.
B LU E TO OT H CON N E C T I O N S Bluetooth wireless technology lets you control the sleepbuds™ using the Bose® Sleep app on your mobile device. Before you can control the sleepbuds™, you must download the app and connect your device with the sleepbuds™. CONNECT YOUR MOBILE DEVICE Download the Bose Sleep app and follow the app instructions. DISCONNECT A MOBILE DEVICE Use the Bose Sleep app to disconnect a device. TIP: You can also disable the Bluetooth feature on your device to disconnect.
A DVA N CED F EAT U R E S RESET THE CHARGING CASE Resetting the charging case powers the case off and then on. This can help resolve charging issues. To reset the charging case, insert a thin paper clip into the hole on the back of the case near the USB connector. Press until you feel a click. UPDATE THE CHARGING CASE The Bose® Sleep app alerts you if an update is available for your charging case. To access the update, download the Bose Updater on your computer. Visit: btu.Bose.
CA R E A N D M A IN T E N A N C E CLEAN THE SLEEPBUDS™ AND CHARGING CASE Your sleepbuds™ and charging case may require periodic cleaning. COMPONENT StayHear + Sleep tips ® Sleepbuds™ nozzles Case charging pins and sleepbuds™ charging contacts Charging case CLEANING PROCEDURE Remove the tips from the sleepbuds™ and wash them with a mild detergent and water. NOTE: Make sure you thoroughly rinse and dry the tips before reattaching them to the sleepbuds™.
T R OUBL ESHOOT I N G TRY THESE SOLUTIONS FIRST If you experience problems with your sleepbuds™, try these solutions first: Power off the sleepbuds™ (see page 14), then power them on again (see page 13). Make sure to wait for the sleepbuds™ charging lights to slowly blink white before closing the case or removing the sleepbuds™. Close and open the charging case, then check the sleepbuds™ and charging case status (see page 22). Charge the charging case (see page 20) and sleepbuds™ (see page 18).
T R OUBL ESHOOT I N G SYMPTOM SOLUTION Make sure the sleepbuds™ are properly placed in the charging case (see page 18). Check the charging case battery lights to make sure that the case battery isn’t depleted (see page 23). Sleepbuds™ don’t charge Make sure that the charging contacts for each sleepbud™ are visible through the back of each StayHear®+ Sleep tip (see page 17). Make sure there is no debris or wax buildup covering the charging contacts on the sleepbuds™ or the charging pins in the case.
T R OUBL ESHOOT I N G SYMPTOM SOLUTION Make sure that both sleepbuds™ fit securely in your ears (see page 15). Make sure that you’re using the right size StayHear®+ Sleep tip for each sleepbud™ (see page 16). You may need a different size for each ear. Poor sound quality Make sure that the sleepbuds™ are correctly oriented in the StayHear+ Sleep tips.
FPO ©2018 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM803896 Rev.
NOISE-MASKING SLEEPBUDS™
' BOSE SLEEP Download on the • AppStore ~ GETITON p• Google Play ' . i ------------- l II Download the Bose®Sleep app to set up your sleepbuds™.
A. Remove the sleepbuds™ from the charging case so that the app can find them. B. Follow the in-app connection instructions.
globai.Bose.
Important Safety Instructions lnstrucciones importantes de seguridad Instructions importantes relatives a Ia securite m:~~~:t~/1' ~~_tO)~Jil.
ENGLISH Please read and keep all safety and use instructions. Refer to the owner's guide for more information about your Bose ') noise-masking sleep buds™ (including accessories and replacement parts) at globai.Bose.com/Support/Sieepbuds or contact Bose customer service for a printed copy. Important Safety Instructions 1. 2. 3. 4. To avoid accidental ingestion, keep the sleepbuds'" away from children and pets. The sleep buds'" contain a silver-zinc battery, and may be hazardous if swallowed.
NOTE: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; "8" is 2008 or 2018. China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China (Shanghai) Pilot Free Trade Zone EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Phone Number: +886-2-2514 7676 Mexico Importer: Bose de Mexico, S.
® globai.Bose.com/Support/Sieepbuds globai.Bose.com/warranty 803892-0010 © 2018 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM803892 Rev.