S U R R O U N D S P E A K E R S 70 0
IMPORTA N T SA F ET Y I N STR UCT I O N S Please read and keep all safety, security, and use instructions. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4.
R EG U L ATORY I N FOR M AT IO N NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R egulatory I nformation This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member States listed in the table. BE DK IE UK FR CY SK HU AT BG DE PT EL HR LV LT MT PL CZ EE FI ES IT RO LU NL SI SE This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling.
R egulatory I nformation Taiwan Restriction of Hazardous Substances Table Equipment name: Powered Speaker, Type designation: 429148 Restricted substances and its chemical symbols Hexavalent chromium (Cr+6) Polybrominated biphenyls (PBB) ○ ○ ○ Polybrominated diphenyl ethers (PBDE) ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ - ○ ○ ○ ○ ○ Unit Lead (Pb) PCBs - ○ Metal Parts - ○ Plastic Parts ○ Speakers Cables Mercury (Hg) Cadmium (Cd) Note 1: “○” indicates that the percentage cont
L EG A L IN FOR M AT ION Security Information T his product is capable of receiving automatic security updates from Bose. To receive automatic security updates, you must complete the product setup process in the Bose Music app and connect the product to the Internet. If you do not complete the setup process, you will be responsible for installing security updates that Bose makes available. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
L I CEN SE D ISCLOSU R ES The following license disclosure applies to the FreeRTOS software package that is included as a component of your Bose Surround Speaker 700 product: Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
CON T EN TS WHAT'S IN THE CARTON Contents.............................................................................................................................. 10 SYSTEM PLACEMENT Recommendations.......................................................................................................... 11 Mount the speakers................................................................................................ 12 WIRELESS RECEIVER SETUP Connect the adapters..................................
CON T EN TS CARE AND MAINTENANCE Clean the surround speakers....................................................................................... 25 Replacement parts and accessories......................................................................... 25 Limited warranty.............................................................................................................. 25 TROUBLESHOOTING Try these solutions first..............................................................................
W HAT'S IN T HE CA RTON CONTENTS Confirm that the following parts are included: Surround speakers (2) Wireless receiver (2) Surround speaker base (2) Power cord (2)* Phillips-head screwdriver Two-pin speaker cable (2) *May ship with multiple power cords. Use the power cord for your region. NOTE: If any part of the product is damaged, do NOT use it. Contact your authorized Bose dealer or Bose customer service. Visit: worldwide.Bose.
SYSTEM P L ACEM EN T RECOMMENDATIONS To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from the wireless receivers. Place the speakers and wireless receivers outside and away from metal cabinets, other audio/video components, and direct heat sources. COMPONENT PLACEMENT RECOMMENDATIONS Place the speakers on their rubber feet on a stable and level surface. Place the speakers at ear height or higher in the back of the room.
System P lacement Mount the speakers You can mount the speakers on wall brackets, ceiling mounts, floor stands, or table stands. To purchase these accessories, visit Bose.com or contact your local Bose dealer. CAUTION: Only use Bose hardware to mount the speakers. Using unauthorized mounts may damage your Bose system and its components.
W IR EL ESS R ECEIV ER SET U P CONNECT THE ADAPTERS 1. Using the screwdriver, turn the screws to the left (counterclockwise) to loosen the wire terminals. 2. Insert the red, stripped end of the two-pin cable marked H into the red H terminal. 3. Insert the black, stripped end of the two-pin cable into the silver z terminal. NOTE: Be sure to only insert the stripped and tinned portions of each exposed wire to avoid clamping the wire’s insulation. 4.
W IRSystem EL ESS R P ECEIV lacement ER SET U P 5. While holding the speaker, place the base into the bottom. The base should fit flush into your speaker with the wire terminals facing the back. 6. Attach the base to the speaker using the screwdriver to turn the screw on the bottom of the base to the right (clockwise) until seated.
W IR EL ESS R ECEIV ER SET U P IDENTIFY SWITCH SETTINGS ON THE WIRELESS RECEIVERS The speakers connect to wireless receivers to communicate with your soundbar. The receivers come preset to a left and right channel out of the box. You can use the switch on the front of the receiver to adjust the channel settings. 1. Confirm that the switch on one wireless receiver is set to L (left). 2. Confirm that the switch on the other wireless receiver is set to R (right).
W IRSystem EL ESS R P ECEIV lacement ER SET U P CONNECT THE SPEAKERS 1. Place your speaker according to the “Placement guidelines” on page 11. 2. Connect and attach the base to the surround speaker see page 15. 3. Insert the other end of the two-pin cable into your wireless receiver. You hear or feel a click. 4. Repeat steps 1 - 3 to connect your other speaker.
P OW ER CONNECT THE SURROUND SPEAKERS TO POWER 1. Connect the power cord to the wireless receiver. 2. Plug the other end of the power cord into an AC (mains) power outlet. 3. Repeat steps 1 – 2 to connect the other speaker to power.
CON N ECT TO A SOUN D BA R CHOOSE YOUR CONNECTION METHOD The way you connect the surround speakers depends on your soundbar. Choose your connection method from the table below. SOUNDBAR Bose Soundbar 500 or Bose Soundbar 700 CONNECTION METHOD Update the soundbar software (required), then connect using the Bose Music app (see page 20). NOTE: If you can't access or have trouble connecting using the Bose Music app, see “Troubleshooting” on page 26. Connect using the Bose Music app (see page 20).
CON System N ECT TO P lacement A SOUN D BA R UPDATE YOUR BOSE SOUNDBAR 500/700 If you are connecting your Bose Soundbar 500 or Bose Soundbar 700 to the surround speakers, you MUST make sure your soundbar software is up to date. If your soundbar has been set up with the Bose Music app and is connected to your Wi-Fi® network, your soundbar updates automatically. If you have not set up your soundbar using the Bose Music app, download the app and follow the app instructions.
CON System N ECT TO P lacement A SOUN D BA R CONNECT USING THE BOSE MUSIC APP CAUTION: Before you connect to your Bose Soundbar 500 or Bose Soundbar 700, you MUST make sure your soundbar software is up to date. Failure to update may impact sound quality and cause damage to your surround speakers. For more information on updating your Bose Soundbar 500 or Bose Soundbar 700, see page 19. 1. In the Bose Music app, from the My Products screen, select your soundbar. 2.
CON System N ECT TO P lacement A SOUN D BA R UPDATE YOUR SOUNDTOUCH 300 SOUNDBAR If you are connecting your SoundTouch 300 to the surround speakers, you MUST make sure your soundbar software is up to date. You can update the system software using the SoundTouch app or the remote. The app alerts you when a software update is ready is available for your soundbar. 1. On the remote, press the SoundTouch button e. 2.
CON N ECT TO A SOUN D BA R CONNECT USING THE SOUNDTOUCH 300 REMOTE CAUTION: You MUST make sure your soundbar software is up to date for optimal sound quality and to prevent damage to your surround speakers. For more information about updating your soundbar, see page 21. 1. On your soundbar remote, press the SoundTouch button e. 2. Press and hold k until the connectivity l light on the soundbar blinks white. Once connected, you hear a tone.
CON N ECT TO A SOUN D BA R CHECK FOR SOUND NOTE: To avoid hearing distorted audio, turn off your TV speakers. Refer to your TV owner’s guide for more information. 1. Power on your TV. 2. If you are using a cable/satellite box or other secondary source: a. Power on this source. b. If this source is connected to your TV, select the appropriate TV input. 3. Power on the soundbar. You hear sound coming from the surround speakers.
W IR EL ESS R ECEIV ER STATU S STATUS LIGHT The light on the front of the wireless receiver shows system status.
CA R E A N D M A IN T EN A N CE CLEAN THE SURROUND SPEAKERS Clean the exterior of the surround speakers with a soft, dry cloth. CAUTIONS: • Do NOT allow liquids to spill onto the surround speakers or into any openings. • Do NOT use any sprays near the surround speakers. • Do NOT use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. • Do NOT allow objects to drop into any openings.
T R OUBL ESHOOTI N G TRY THESE SOLUTIONS FIRST If you experience problems with the surround speakers: • Unplug the power cords for the wireless receivers and soundbar, wait 30 seconds, and plug them firmly into a live AC (mains) outlet. • Secure all cables. • Check the wireless receiver status light (see page 24). • Move the surround speakers and soundbar away from possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).
T R OUBL ESHOOTI N G SYMPTOM SOLUTION Unmute the system. Increase the volume. Confirm that the soundbar is playing audio. If not, refer to your soundbar owner’s guide for troubleshooting information (see page 28). Confirm that the status light is solid white, indicating that the surround speakers are connected to the soundbar (see page 24). Intermittent or no audio Test different sources (if available). Repeat the connection process (see page 18).
T R OUBL ESHOOTI N G ACCESS YOUR SOUNDBAR OWNER’S GUIDE For instructions and troubleshooting specific to your soundbar, refer to your soundbar owner’s guide. Visit: Bose Soundbar 500: worldwide.Bose.com/Support/SB500 Bose Soundbar 700: worldwide.Bose.com/Support/SB700 SoundTouch 300 soundbar: global.Bose.com/Support/ST300 Bose Smart Soundbar 300: worldwide.Bose.
©2020 Bose Corporation, 100 The Mountain Road, Framingham, MA 01701-9168 USA AM836462-0010 Rev.
