User's Manual
Table Of Contents
- TABLE OF CONTENTS
- PORTFOLIO LINEUP
- L1 PRO ONBOARD MIXER
- L1 PRO MIX APP
- Bluetooth Connections
- RaceTrack Driver
- Powerful Integrated Performance
- LINE ARRAY TECHNOLOGY
- THE ADVANTAGES
- DIRECTS SOUND TO FARTHER DISTANCES
- OVERCOMES CHALLENGING ENVIRONMENTS
- SLIM ADAPTABLE DESIGN
- Selection Guide
- L1 PRO8
- L1 PRO16
- L1 PRO32 + SUB1
- L1 PRO32 + SUB2
- SUB1 | SUB2
- CARDIOID SUBS EXPLAINED
- CARDIOID CONFIGURATION
- VENUE RECOMMENDATION
- CONNECTION DIAGRAM
- L1 PRO8 SYSTEM DIAGRAM EXAMPLE
- L1 PRO16 SYSTEM DIAGRAM EXAMPLE
- L1 PRO32 SYSTEM DIAGRAM EXAMPLE
- L1 PRO32 SYSTEM DIAGRAM EXAMPLE 2
- TONEMATCH
- ACCESSORIES
L1 PRO SERIES
19
To configure cardioid subs, stack two identical modules as seen to the left, connect the top sub module to an L1 Pro32 via a SubMatch cable or an external source
and A/C power. Next set the top sub to positive polarity and the bottom sub to cardioid mode by pressing and holding the polarity button until the CARDIOID LED is
illuminated.
Make sure that the LEVEL settings are matched across the sub modules as mismatching them will skew the performance of cardioid mode. Once this setup has been
completed a 10dB down point will be present directly behind the sub stack. This performance will be extremely beneficial if your performance includes any large
resonant instruments such as an upright bass or a drum set.
CARDIOID CONFIGURATION
Connecting and setting up
TOP SUB
BOTTOM SUB
OR
Line In from
external source
Power
SubMatch In
from L1 Pro32
SubMatch In
from top sub
SubMatch Thru
from top sub