User's Manual

L1 PRO SERIES
3
1
2












1
Illuminated digital rotary encoders adjusts the level of volume, treble,
bass, or reverb for your desired channel. Press the control to switch
between parameters; rotate the control to adjust the level of your
selected parameter.
Signal/clip LED indicator illuminates green when a signal is present and
will illuminate red when the signal is clipping.
Channel mute by pressing the button. While muted, the switch will
illuminate white.
Channel ToneMatch button selects the ToneMatch preset for an
individual channel. Use MIC for microphones and INST for acoustic
guitar. The corresponding LED will illuminate white while selected. It will
illuminate green when a custom preset is selected in the L1 Mix app.
Combination input jack accepts analog input for connecting microphone
(XLR) and instrument (1/4-inch TRS or TS) cables.
Phantom power provides 48-volt power to channels 1 and 2. The LED will
illuminate white while phantom power is applied.
USB-C port for firmware updates and Bose service.
XLR line output to connect the line-level output to a Sub1/Sub2 or
another bass module.
ToneMatch port connects your L1 Pro8/Pro16/Pro32 to a T4S or T8S
ToneMatch mixer via a ToneMatch cable.
Bluetooth® pair button sets up pairing with Bluetooth capable devices,
such as mobile phones, tablets, and laptops. The LED will flash blue while
the system is discoverable and illuminate solid white when a device is
paired for streaming.
Aux line input uses a 3.5-millimeter (1/8-inch) TRS cable to connect a
line-level audio source.
Line input uses a 6.4-millimeter (1/4-inch) TRS cable to connect line-level
audio sources.
System EQ button scrolls through and selects a master EQ suitable for
the use case. The corresponding LED will illuminate white while selected.
Standby button is pressed to power on. The LED will illuminate white
while the system is on.
3
2
4
5
6
7
8
9





L1 PRO ONBOARD MIXER