Quick Start Guide
2
|
ENG
MANUFACTURER INFORMATION
Please read and keep all safety and use instructions.
Bose Lenses are in compliance with the essential requirements and other relevant provisions of Regulation
EU 2016/425 on personal protective equipment and all other applicable EU directive requirements. Bose
Corporation’s declaration of conformity can be found at: www.Bose.com/compliance
PPE Regulation (EU) 2016/425
QTY: 1 EA
This product complies with ANSI Z80.3, AS/NZS 1067.1, and EN ISO 12312-1.
• Tinted eyewear is not recommended to be worn for night driving.
• NOT SUITABLE FOR DRIVING IN TWILIGHT OR AT NIGHT.
• The product is designed to block greater than 99% UVA and UVB light energy. This product is in compliance with
ANSI Z80.3.
• Only Bose-approved lenses should be used with the Bose Frames products.
• Not for direct observation of the sun.
• Not for protection against artificial light sources, e.g. solaria.
• Not for use as eye protection against mechanical impact hazards.
• When not in use, store the product in the carry case provided.
Regulatory Information
China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China
(Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
Phone Number: +886-2-2514 7676
Legal Information
Bose Corporation Headquarters: 1-877-230-5639
Bose, Bose Frames, and Bose Lenses are trademarks of Bose Corporation.
©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed, or otherwise used without
prior written permission.
Limited Warranty
The lenses are covered by a limited warranty. Visit our website at global.Bose.com/warranty for details of the
limited warranty.
To register your product, visit global.Bose.com/register for instructions. Failure to register will not aect your limited
warranty rights.