863350-1200-Owner-Guide
Table Of Contents
- What’s In the Box
- Dolby Atmos® technology
- Soundbar Placement
- Set Up the Soundbar
- Bose Music App Setup
- Existing Bose Music App Users
- ADAPTiQ Audio Calibration
- Soundbar Controls
- Voice Assistant
- Preset Personalization
- Bluetooth Connections
- Stream Audio With Airplay
- Soundbar Status
- Advanced Features
- Connect Bose Products
- Care and Maintenance
- Troubleshooting
- Appendix: Setup Reference
18
|
ENG
SET UP THE SOUNDBAR
CONNECT THE SOUNDBAR TO POWER
1. Connect the power cord to the b port on the back of the soundbar.
2. Plug the other end of the power cord into an AC (mains) power outlet.
The soundbar powers on, and the light bar glows solid amber.
NETWORK STANDBY
The soundbar transitions to network standby when audio has stopped and you have
not pressed any buttons or talked to your voice assistant for 20 minutes.
To wake the soundbar from network standby:
• On the remote, press the Power button I, a source button (see page 24), or the
Bose Music button m then a preset button (see page 25).
• Play or resume audio using your mobile device or using the Bose Music app.
• Talk to Google Assistant or Amazon Alexa.
NOTES:
• To access your voice assistant in network standby, make sure the soundbar has
been set up using the Bose Music app (see page 19) and the microphone is on
(see page 44).
• You can disable the standby timer using the Bose Music app. You can access this
option from the Settings menu.