Owner's Manual

12
Listening to an External Audio Source
Français Español English
Playing a connected audio source
To listen to a connected source:
1. Turn on the external audio device.
2. Press AUX 1-2 on the Acoustic Wave
®
II CD changer remote control. Press AUX 1-2
again to switch between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the
display to confirm your selection (
Figure 9).
3. Adjust the volume using the remote control.
Note: The Acoustic Wave
®
II CD changer remote control cannot turn a connected AUX device
on or off, or change its settings or selections.
Figure 9
Acoustic Wave
®
II CD
changer sample AUX
display
Play/Pause Stop Next Disc Random
AUX 1 AUX 2
ON/OFF
AUX