BASS MODULE 700
IMPORTA N T SA F ET Y I N STR UCT I O N S Please read and keep all safety, security, and use instructions. Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4.
IMPORTA N T SA F ET Y I N STR UCT I O N S WARNINGS/CAUTIONS This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock. This symbol on the product means there are important operating and maintenance instructions in this guide. This product contains a tempered glass surface. Use caution to avoid impact. In the event of breakage, use care in handling broken glass. This product contains magnetic material.
R EG U L ATORY I N FOR M AT IO N NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
R EG U L ATORY I N FOR M AT IO N The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.
R EG U L ATORY I N FOR M AT IO N China Restriction of Hazardous Substances Table Names and Contents of Toxic or Hazardous Substances or Elements Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent (CR(VI)) Polybrominated Biphenyl (PBB) Polybrominated diphenylether (PBDE) PCBs X O O O O O Metal Parts X O O O O O Plastic Parts O O O O O O Speakers X O O O O O Cables X O O O O O Part Name This table is prepared in accordance with
L EG A L IN FOR M AT ION Security Information T his product is capable of receiving automatic security updates from Bose. To receive automatic security updates, you must complete the product setup process in the Bose Music app and connect the product to the Internet. If you do not complete the setup process, you will be responsible for installing security updates that Bose makes available. Google Play is a trademark of Google LLC.
CON T EN TS WHAT’S IN THE CARTON Contents.............................................................................................................................. 10 BASS MODULE PLACEMENT Recommendations.......................................................................................................... 11 Placing a second bass module........................................................................... 12 POWER Connect the bass module to power..............................................
CON T EN TS CARE AND MAINTENANCE Clean the bass module.................................................................................................. 21 Replacement parts and accessories......................................................................... 21 Limited warranty.............................................................................................................. 21 TROUBLESHOOTING Try these solutions first.........................................................................
W HAT’S IN T HE CA RTON CONTENTS Confirm that the following parts are included: Bose Bass Module 700 Power cord* *May ship with multiple power cords. Use the power cord for your region. NOTE: If any part of the product is damaged or if the glass on the bass module is broken, do NOT use it. Contact your authorized Bose dealer or Bose customer service. Visit: global.Bose.
BASS M OD UL E P L ACEM ENT RECOMMENDATIONS For best performance, follow these recommendations when placing the bass module: Do NOT place any objects on top of the bass module. To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from the bass module. Place the bass module outside and away from metal cabinets, other audio/video components and direct heat sources. Place the bass module on a stable and level surface.
Bass M odule P lacement Placing a second bass module Try placing each bass module in multiple locations to see what sounds best for your listening area. After placing a module in a new location, run ADAPTiQ audio calibration using the instructions in your soundbar owner’s guide (see page 24). For more bass, place the modules closer to each other or closer to walls and corners.
P OW ER CONNECT THE BASS MODULE TO POWER 1. Connect the power cord to the b connector on the bass module. 2. Plug the other end of the power cord into an AC (mains) power outlet.
CON N ECT TO A SOUN D BA R OR S P E A K E R CHOOSE YOUR CONNECTION METHOD The way you connect the bass module depends on your soundbar or speaker. Choose your connection method from the table below. SOUNDBAR OR SPEAKER CONNECTION METHOD Connect using the Bose Music app (see page 15). Bose Soundbar 500 or Bose Soundbar 700 NOTE: I f you can’t access or have trouble connecting using the Bose Music app, see “Troubleshooting” on page 22.
Connect to a Soundbar or S peaker CONNECT USING THE BOSE MUSIC APP 1. In the Bose Music app, from the My Bose screen, select your soundbar. 2. Tap the soundbar image in the bottom-right corner of the screen. 3. Tap Settings > Accessory Speakers > Add Bose Accessory Speakers. 4. Follow the app instructions. New to the Bose Music app? 1. On your mobile device, download the Bose Music app. 2. Follow the app instructions.
Connect to a Soundbar or S peaker CONNECT USING THE SOUNDTOUCH 300 REMOTE 1. On the SoundTouch 300 remote, press the SoundTouch button e. 2. Press and hold k until the connectivity light l on the soundbar blinks white. Once connected, you hear a tone. The light on the back of the bass module and l on the soundbar glow white. NOTES: Connecting may take several minutes. If the bass module doesn’t connect to the soundbar, see “Troubleshooting” on page 22.
Connect to a Soundbar or S peaker CONNECT USING AN AUDIO CABLE You can connect the module to the soundbar or speaker using a 3.5 mm audio cable (not provided). If you don’t have a 3.5 mm audio cable (commonly used for headphones and mobile devices), visit worldwide.Bose.com/Support/BASS700 to purchase a 15 ft. (4.5 m) cable. You can also purchase this part at your local electronics store. 1. Connect one end of a 3.5 mm audio cable to the x connector on the bass module.
Connect to a Soundbar or S peaker 2. Connect the other end of the cable to the h connector on the back of the soundbar or speaker. BASS NOTES: Bose TV Speaker: Make sure to connect the cable to the h connector, not the B connector. SoundTouch 300 soundbar: Connect the cable to the p connector. 3. Check for sound (see page 16).
Connect to a Soundbar or S peaker CONNECT A SECOND BASS MODULE (OPTIONAL) Connecting a second bass module may produce more consistent or powerful bass throughout your listening area. NOTES: For more information about placing a second bass module, see page 12. If your current bass module is connected to your soundbar or system with a 3.5 mm audio cable (see page 17), you can’t connect a second bass module.
BASS M OD U L E STATUS STATUS LIGHT The light on the back of the module shows system status.
CA R E A N D M A IN T EN A N CE CLEAN THE BASS MODULE Clean the exterior of the bass module with a soft, dry cloth. CAUTIONS: Do NOT allow liquids to spill onto the bass module or into any openings. Do NOT use any sprays near the bass module. Do NOT use any solvents, chemicals or cleaning solutions containing alcohol, ammonia or abrasives. Do NOT allow objects to drop into any openings.
T R OUBL ESHOOTI N G TRY THESE SOLUTIONS FIRST If you experience problems with the bass module: Unplug the power cords for the bass module and soundbar or speaker, wait 30 seconds and plug them firmly into a live AC (mains) outlet. Secure all cables. Check the bass module status (see page 20). Move the bass module and soundbar or speaker away from possible interference (wireless routers, cordless phones, televisions, microwaves, etc.).
T roubleshooting SYMPTOM SOLUTION Unmute the system. Increase the volume. Confirm that the soundbar or speaker is playing audio. If not, refer to your soundbar or speaker owner’s guide for troubleshooting (see page 24). Test different sources (if available). Intermittent or no audio Make sure that you’re playing audio that has bass frequencies, such as music or movies.
R EF ER EN CE ACCESS YOUR SOUNDBAR OR SPEAKER OWNER’S GUIDE For instructions and troubleshooting specific to your soundbar or speaker, refer to your soundbar or speaker owner’s guide. Visit: Bose Soundbar 700: worldwide.Bose.com/Support/SB700 Bose Soundbar 500: worldwide.Bose.com/Support/SB500 SoundTouch 300 soundbar: global.Bose.com/Support/ST300 Bose TV Speaker: worldwide.Bose.
©2020 Bose Corporation 100 The Mountain Road, Framingham, MA 01701-9168 USA AM772090-0020 Rev.
