SoundLink BT Mobile spkr II covers_EUR.fm Page 1 Tuesday, July 10, 2012 12:41 PM SOUNDLINK® BLUETOOTH® MOBILE SPEAKER II ©2012 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM359619 Rev.
Bruiser_OG.book Page 2 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English SAFETY INFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you to properly use your new Bose® product and enjoy its features. Please save this owner’s guide for future reference.
Bruiser_OG.book Page 3 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 SAFETY INFORMATION • Do not expose the product or battery to excessive heat, including direct sunlight or fire and storage or use inside cars in hot weather, where it can be exposed to temperatures in excess of 140°F (60°C). Doing so may cause the battery and power supply to generate heat, rupture, or ignite.
Bruiser_OG.book Page 4 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English SAFETY INFORMATION Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water or moisture. 6. Clean only with a dry cloth. 12. Refer all servicing to qualified service personnel.
Bruiser_OG.book Page 5 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 SAFETY INFORMATION Information about products that generate electrical noise This device complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. This device must not be co-located or operating in conjunction with any other antennas or transmitters. This device complies with Part 15 of the FCC Rules.
Bruiser_OG.
Bruiser_OG.book Page 7 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 8 Overview . . . . . . . . . . . . . . . . . . . . . . . . . 8 Unpacking . . . . . . . . . . . . . . . . . . . . . . . 8 Opening the cover . . . . . . . . . . . . . . . . . 9 Placing the speaker . . . . . . . . . . . . . . . 10 OPERATION . . . . . . . . . . . . . . . . . . . . . . . . .
Bruiser_OG.book Page 8 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English INTRODUCTION Overview ® Thank you for purchasing the SoundLink Bluetooth® Mobile speaker II. Now you can enjoy your music wirelessly from your smartphone, tablet, laptop, or other Bluetooth® enabled device anywhere you choose. Features • Wireless Bluetooth link eliminates the need to dock or physically connect your Bluetooth device.
Bruiser_OG.book Page 9 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 INTRODUCTION Opening the cover When opened, the cover forms a stand for the speaker. • No sound is heard from the speaker unless the cover is opened. • When you close the cover, magnets hold it in place. When closed, the cover protects the speaker. • If you close the cover while audio is playing, the speaker turns itself off. 1.
Bruiser_OG.book Page 10 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English INTRODUCTION Placing the speaker ® ® When using your SoundLink Bluetooth Mobile speaker II indoors, the tonal quality can vary depending on where the speaker is placed in a room.
Bruiser_OG.book Page 11 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 OPERATION Connecting to AC power ® ® Before using your new SoundLink Bluetooth Mobile speaker II the first time, you should connect it to AC (mains) power. To connect to AC power: 1. Depending on your region of the world, do one of the following to prepare your power pack for use: A. Unfold the power supply prongs. OR B.
Bruiser_OG.book Page 12 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English OPERATION 2. Plug the DC power cord on the power supply into the DC connector on the SoundLink® Mobile speaker II. 3. Plug the power supply into a live AC (mains) outlet. • The speaker emits a tone to confirm the connection, and charging begins. • Once connected to AC power, your SoundLink® Mobile speaker II is ready for use.
Bruiser_OG.book Page 13 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 OPERATION System status indicators The status indicators, located on the front of the SoundLink® Mobile speaker II, illuminate to indicate when a source or feature is activated. The speaker is playing the source connected to the AUX ( ) input.
Bruiser_OG.book Page 14 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English OPERATION Control buttons • Mutes sound from the speaker. The control buttons are located on the top of the speaker. • Press to turn the speaker on or off. • Press and hold to check the battery level (see “Checking the battery” on page 18). • Press to select the source connected to the (AUX) input. See “Adding another source” on page 16.
Bruiser_OG.book Page 15 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 OPERATION To begin pairing with a Bluetooth device 1. With the Bluetooth device and the SoundLink® Mobile speaker II both turned on, press and hold the Bluetooth button on the speaker for three seconds to make the speaker discoverable.
Bruiser_OG.book Page 16 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English OPERATION To pair additional devices With the Bluetooth device and the SoundLink® Mobile speaker II both turned on, press the Bluetooth button on the speaker for three seconds to make the speaker discoverable again. Then follow steps 2 - 4 on this page. The SoundLink® Mobile speaker II memory can hold up to six paired devices.
Bruiser_OG.book Page 17 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 OPERATION To add a source: 1. Plug the cable from the audio device into the AUX ( ) connector on the back of the SoundLink® Mobile speaker II. 2. Press the AUX button. 3. Adjust the volume on the connected device to near maximum, then use the SoundLink® Mobile speaker II volume buttons to adjust the level.
Bruiser_OG.book Page 18 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English OPERATION Operating on battery power A fully charged battery provides approximately three hours of use at maximum volume. The rate of battery discharge varies with the volume setting. You can extend the battery playback time by reducing the volume. Checking the battery The battery status indicator is normally off to conserve battery power.
Bruiser_OG.book Page 19 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 MAINTENANCE AND Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 CARE Troubleshooting Problem What to do Speaker will not turn • Make sure your system is connected to a working AC (mains) outlet. on (AC power) • Make sure the protective cover is open.
Bruiser_OG.book Page 20 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English MAINTENANCE AND CARE Problem No audio from a Bluetooth® device Cannot pair the speaker with my Bluetooth® device 20 What to do • Move your Bluetooth device and/or SoundLink® Mobile speaker II away from other devices that generate electromagnetic interference. Examples are cordless phones, microwave ovens, wireless network routers, or other Bluetooth devices.
Bruiser_OG.book Page 21 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 MAINTENANCE AND CARE Problem Cannot pair the speaker with my Bluetooth® device – cont. What to do ® • Reset the SoundLink Mobile speaker II: Press the mute button for 10 seconds. Your Bluetooth device is disconnected and the SoundLink® Mobile speaker II turns off. Then press Power to turn the SoundLink® Mobile speaker II back on.
Bruiser_OG.book Page 22 Tuesday, June 26, 2012 10:29 AM Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 Tab 3, 11 Tab2, 10 English MAINTENANCE AND CARE Problem Poor sound quality from a Bluetooth® device – cont. No audio from the AUX source What to do • Try unpairing your Bluetooth device from the SoundLink® Mobile speaker II and then re-pairing the two. This action can possibly clear issues that might have occurred during initial device pairing.
Bruiser_OG.book Page 23 Tuesday, June 26, 2012 10:29 AM English Tab 2, 10 Tab 3, 11 Tab4, 12 Tab 5, 13 Tab 6, 14 Tab2, 7, 15 Tab 8, 16 MAINTENANCE AND CARE Cleaning To clean the exterior surface of your product, you can wipe it using a soft, dry cloth. • Do not use solvents, chemicals, or sprays. • Do not allow liquids to spill or objects to drop into any openings. Contacting customer service For questions about the SoundLink® Bluetooth® Mobile speaker II, contact your local Bose dealer.
SoundLink BT Mobile spkr II covers_EUR.fm Page 1 Tuesday, July 10, 2012 12:41 PM SOUNDLINK® BLUETOOTH® MOBILE SPEAKER II ©2012 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM359619 Rev.