Owner's Manual

11
TAB 5, 13TAB 4, 12 TAB 6, 14 TAB 8, 16TAB 7, 15English TAB 3, 11TAB 2, 10
OPERATION
System status lights
The status lights on the Bose
®
wireless computer
speaker front panel indicate source selection.
Using the USB key
The USB key will automatically connect your computer
with the wireless speaker when you insert it into a USB
port. The wireless speaker must be powered on and
selected as the audio output device in order to connect.
Note: If the USB key does not automatically connect, see
“Restoring the wireless link” on page 20.
Note: If the power light is on but there is no audio, see “If you
don’t hear music from the wireless speaker:” on page 8.
AUX
AUDIO IN source (page 13)
Off: ................AUX source not selected
On: ................AUX source is selected
Wireless source
Off: ................... No wireless connection
Fast Flashing: .. Wireless source is
connecting
Slow Pulse: ....... Speaker or USB key is
in discoverable mode
On: ................... Wireless source is
connected
Brief Flash: ....... Wireless source is
(every 3 sec) selected, but discon-
nected at the computer
Note: Each button pressed on
the remote causes the light for the
selected source to blink.
Disconnect-reconnect button
Press to disconnect or reconnect
the wireless speaker
Power light
Off: ...................... USB key is not powered
Slow flashing: ..... Powered and available for
connecting to the wireless
speaker
Fast flashing: ....... Establishing a connection
On: ....................... Connected to the wireless
speaker
Trinity_OG.book Page 11 Tuesday, May 17, 2011 11:56 AM