Owner's Manual

8
SYSTEM SETUP
EnglishTAB 6, 14TAB 8, 16 TAB 7, 15 TAB 3, 11TAB 5, 13 TAB 2, 10TAB 4, 12
You may notice the wireless source light and USB key
power light start flashing faster as the speaker estab-
lishes a wireless connection.
When both lights change from flashing to always
on, and you hear a tone from the speaker, your
speaker is ready to use.
5. Open the music application on your computer, or
navigate to an Internet radio station and play the
music you want to hear.
To disconnect or reconnect: Press the button on
the end of the USB key. See “Using the USB key” on
page 11 for more information.
Note: While listening to music through the Bose
®
wireless
computer speaker, you will not hear music through your
computer’s internal speakers or sound card.
If you don’t hear music from
the wireless speaker:
Restart the music application
If you don’t hear music from the wireless speaker after
successfully connecting the USB key, you may need to
quit and restart your music application.
Set the audio output device
If you still have no audio from the wireless speaker, you
may need to set your computer’s audio output device.
See page 9 for more information.
Check the volume controls
For best performance make sure:
• The wireless computer speaker volume is turned up
and the sound is not muted.
• The volume on your computer is turned up and is not
muted.
• Your music application is running and the volume is
turned up and not muted.
Trinity_OG.book Page 8 Tuesday, May 17, 2011 11:56 AM