t

TECHNICAL DATA
PRO.BOSE.COM 1 OF 4
DesignMax DM3SE
surface-mounted loudspeaker
Technical Specifications
SINGLE LOUDSPEAKER PERFORMANCE
Frequency Response (-3 dB)
(1)
85 – 20,000 Hz
Frequency Range (-10 dB)
(1)
75 - 20,000 Hz
Nominal Coverage (H x V)
(2)
140° × 140°
Nominal Coverage Angle (1 - 10 kHz) 135° × 135°
Bose extended-lifecycle test
(5)
AES component test
(6)
Power Handling, long-term continuous 25 W
30 W
Power Handling, peak 100 W
120 W
Sensitivity (SPL / 1 W @ 1m)
(3)
84 dB
84 dB
Calculated Maximum SPL @ 1 m
(4)
98 dB
99 dB
Calculated Maximum SPL @ 1 m, peak 104 dB
105 dB
Crossover 1.7 kHz (passive 2-way crossover)
Loudspeaker EQ Not Required, Bose EQ voicing and SmartBass Processing available
Recommended High-Pass Protection 80 Hz with recommended 24 dB / octave filter
Transformer taps
70V: 3, 6, 12, 25 W, bypass
100V: 6, 12, 25 W, bypass
TRANSDUCERS
Low Frequency 1 × 83 mm woofer (3.25 in), weather-treated
High Frequency 1 × 20 mm (0.75 in) neodymium dome tweeter, coaxially mounted, weather-treated
Technology Dispersion Alignment System, 127 mm (5 in) system diameter
Nominal Impedance 8 ohms (transformer bypass)
Product Overview
DesignMax loudspeakers bring outstanding audio
and aesthetics to any commercial space. The 25-watt
DesignMax DM3SE loudspeaker features a two-
way 3.25-inch woofer and ¾-inch tweeter coaxially
mounted within the Dispersion Alignment system,
producing a frequency range of 75 Hz - 20 kHz.
And with both black and white versions available,
DesignMax loudspeakers integrate seamlessly with
any décor.
Key Features
Deliver instantly impressive sound with custom Bose drivers — no DSP or EQ required. For even better sound, use select
Bose DSPs and amplifiers to enable Bose loudspeaker EQ and SmartBass processing, which expands performance and
response at any listening level
Ensure a consistent listening experience throughout the room with the Dispersion Alignment system, which matches the
coverage of the woofer to the pattern of the tweeter
Blend into any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos
Reduce installation time with the patented QuickHold mounting system, which also reduces strain, hassle, and the chance of
product damage
Install easily — includes Euroblock connectors that make installation and troubleshooting easier
Install DM3SE outside — IP55 rating with standard aluminum grille for outdoor use