Data Sheet

TECHNICAL DATA
PRO.BOSE.COM 1 OF 4
DesignMax DM6SE
surface-mounted loudspeaker
Technical Specifications
SINGLE LOUDSPEAKER PERFORMANCE
Frequency Response (-3 dB)
(1)
70 - 20,000 Hz
Frequency Range (-10 dB)
(1)
59 - 20,000 Hz
Nominal Coverage Angle (H × V)
(2)
125° × 125°
Nominal Coverage Angle (1 - 10 kHz) 115° × 115°
Bose extended-lifecycle test
(5)
AES component test
(6)
Power Handling, long-term continuous 100 W
125 W
Power Handling, peak 400 W
500 W
Sensitivity (SPL/ 1 W @ 1 m)
(3)
88 dB
88 dB
Calculated Maximum SPL @ 1 m
(4)
108 dB
109 dB
Calculated Maximum SPL @ 1 m, peak 114 dB
115 dB
Crossover 1.7 kHz (passive 2-way crossover)
Loudspeaker EQ Not Required, Bose EQ voicing and SmartBass processing available
Recommended High-Pass Protection 60 Hz with recommended 24 dB / octave filter
Overload protection resistor-network power reduction with automatic reset
Transformer taps
70V: 2.5, 5, 10, 20, 40, 80 W, bypass
100V: 5, 10, 20, 40, 80 W, bypass
TRANSDUCERS
Low Frequency 1 x 6.5-inch woofer (165 mm), weather treated
High Frequency 1 x 1.25-inch (32 mm) neodymium dome tweeter, coaxially-mounted, weather-treated
Technology Dispersion Alignment System, 197 mm (7.75 in) system diameter
Nominal Impedance 8 ohms (transformer bypass)
Product Overview
DesignMax loudspeakers bring outstanding audio and
aesthetics to any commercial space. The 100-watt
DesignMax DM6SE loudspeaker features a two-
way 6.5-inch woofer and 1.25-inch tweeter coaxially
mounted within the Dispersion Alignment system,
producing a frequency range of 59 Hz - 20 kHz. The
DM6SE is surface-mounted, IP55 outdoor-rated, and
locks onto a hidden QuickHold U-bracket for fast,
secure installation. And with both black and white
versions available, the DM6SE is easy to integrate
with any décor.
Key Features
Deliver instantly impressive sound with custom Bose drivers — no DSP or EQ required. For even better sound, use select Bose
DSPs and amplifiers to enable Bose loudspeaker EQ and SmartBass processing, which expands performance and response at any
listening level
Ensure a consistent listening experience throughout the room with the Dispersion Alignment system, which matches the
coverage of the woofer to the pattern of the tweeter
Blend into any room design with elegant form factors, minimum-bezel grilles available in black or white, and removable logos
Reduce installation time with the patented QuickHold mounting system, which also reduces strain, hassle, and the chance of
product damage
Install easily — includes Euroblock connector
Install DM6SE outside — IP55 rating with standard aluminum grille and weather resistant input cover for outdoor use