® Acoustic Wave II CD Changer Owner’s Guide Guía de usario Notice d’utilitsation ©2007 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM299365 Rev.
Safety Information Please read this owner’s guide English Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features. Please save this owner’s guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
Important Safety Instructions 15. To prevent risk of fire or electric shock, avoid overloading wall outlets, extension cords, or integral convenience receptacles. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions – To ensure reliable operation of the product and to protect it from overheating, put the product in a position and location that will not interfere with its proper ventilation.
Français Español English Important Safety Instructions 18. Use Proper Power Sources – Plug the product into a proper power source, as described in the operating instructions or as marked on the product. Antenna grounding Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70. 19. Avoid Power Lines – Use extreme care when installing an outside antenna system to keep from touching power lines or circuits, as contact with them may be fatal.
Contents 7 7 8 8 9 9 10 Listening to an External Audio Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting an external audio source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playing a connected audio source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 12 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting Up Your Acoustic Wave® II CD Changer English Features and benefits of the Acoustic Wave® II CD changer Thank you for selecting the Bose® Acoustic Wave® II CD changer accessory.
Setting Up Your Acoustic Wave® II CD Changer Selecting a location for your music system and changer English The Acoustic Wave® II CD changer is designed to fit under your Acoustic Wave® music system II. Before you connect the two, however, select a good location for the stacked units. When choosing the location, remember that the tonal quality of your Acoustic Wave® music system II, as with any high-performance sound system, will vary with room placement.
Setting Up Your Acoustic Wave® II CD Changer English Making the connections Before you start this setup procedure, disconnect the AC power cord on your Acoustic Wave® music system II and set it aside. You will need to use it again in Step 3. Français Español On the back of the CD changer there are two cables that connect to your Acoustic Wave® music system II. 1. Insert the two connectors of the AUX input cable into AUX IN jacks on the back of the music system (Figure 3).
Operating Your System Using the remote control English The remote control included with your Acoustic Wave® II CD changer allows you to control functions of both the CD changer and your Acoustic Wave® music system II. Therefore, you only need this remote to control your system. Just aim the remote at the system and press the buttons. The remote normally works within 20 feet of the front panel. If the remote stops operating or its range seems reduced, it may be time to replace the battery.
Operating Your System English Using the Acoustic Wave® II CD changer control panel The Acoustic Wave® II CD changer control panel provides playback control buttons and a display for operating the changer only. It cannot control any functions of the Acoustic Wave® music system II. Figure 5 describes the control buttons and display window.
Operating Your System Loading/unloading discs into the CD changer English The Acoustic Wave® II CD changer holds up to five CDs. When a CD is inserted into a slot in the changer and it is on, the changer’s display window indicates the number of the CD slot selected, the track number playing, and the elapsed time (see Figure 5). To load a CD into the changer, insert one edge of the disc into an empty slot and push the disc all the way in (Figure 7).
Operating Your System To use the Acoustic Wave® II CD changer: English Press CD changer on the remote control, or press On/Off on the CD changer control panel to turn on (if off) the complete system and select the CD changer. TRACK CHANGER ON/OFF Español Stop Next Disc CD Mode Playing CDs in the CD changer • Press Play/Pause to start playing the selected CD. Press again to pause it. While a CD is playing, the display tells you the disc slot number, track number, and elapsed time.
Listening to an External Audio Source Connecting an external audio source English The Acoustic Wave® II CD changer provides two rear-panel inputs (AUX 1 and AUX 2) for connecting external audio devices such as a TV, VCR, DVD player, cassette player, or MP3 player. This gives you the advantage of hearing Acoustic Wave® music system II sound from a range of sources. To make the connection, use an appropriate stereo cable (not included).
Listening to an External Audio Source English Playing a connected audio source Español To listen to a connected source: 1. Turn on the external audio device. 2. Press AUX 1-2 on the Acoustic Wave® II CD changer remote control. Press AUX 1-2 again to switch between the AUX 1 and AUX 2 inputs. AUX 1 or AUX 2 appears on the display to confirm your selection (Figure 9). 3. Adjust the volume using the remote control.
Care and Maintenance Replacing the remote control battery Place the remote control face down on a flat surface. 2. Using your finger, push the tab lock to the side as shown and hold (Figure 10a). Slide the battery compartment open. 3. Keeping the remote control face down, insert the new battery into the compartment with the + symbol facing up (Figure 10b). 4. Gently slide the battery compartment closed. It locks automatically.
Care and Maintenance Problem What to do No system operation • Make sure the power cord for the Acoustic Wave® II CD changer is completely plugged in both at the changer jack and at the wall outlet. No sound or sound is muffled • If the Acoustic Wave® II CD changer or an audio device connected to it is playing, make sure that the “AUX” source indicator appears on the Acoustic Wave® music system II display.
Care and Maintenance Limited warranty English What is covered: All parts defective in material or workmanship. For how long: One year (two years, Europe) from the purchase date. What we will do: We will, at our sole option, repair or replace any defective parts free of charge. Español What you must do: A. Call Bose® Customer Service and ask for shipping instructions. B. Properly pack the unit, if possible, in the original carton for shipping.
Bose Corporation USA Customer Support Canada Customer Support European Office Bose Products B.V., Nijverheidstraat 8 1135 GE Edam, Nederland TEL 0299-390111 FAX 0299-390114 Bose Pty Limited, Unit 3, 2 Holker Street, Newington NSW, 2127 TEL +61 (0)2 8737 9999 FAX +61 (0)2 8737 9924 Postfach 1468 48504 Nordhorn TEL 05921 3030 123 FAX 05921-724250 France 50-52 Siphya Road Mahaprudtharam, Bangrak Bangkok 10500, Thailand TEL 66-2-234-6467 Nederland PT Audio Pratama Bose B.V.
® Acoustic Wave II CD Changer Owner’s Guide Guía de usario Notice d’utilitsation ©2007 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM299365 Rev.