Lexie Hearing Aids Powered by Bose RECEIVER AWIRE REPLACEMENT GUIDE
We’re here to help. For help, call (779) 212-7334 and speak to a Lexie Expert™ or go to lexiehearing.
What you need: Receiver wire Hearing aids Dome kit (optional)
Step 1: Receiver (red or blue) Clear plastic end Identify the two ends of the receiver wire.
Step 2: On the hearing aids, find the old receiver wire that has the same color speaker as the new cable (red or blue).
Step 3: Firmly pull the old receiver wire until it detaches from the hearing aid body. Note: You may have to pull harder than expected.
Step 4: Align the clear plastic end of the new receiver wire with the port on the hearing aid body so the red or blue marks line up.
Step 5: Insert the receiver wire into the hearing aid body until you hear or feel a click.
Step 6: OR Get a dome for the new receiver wire. Either pick your size from a dome kit (available separately) or firmly pull the dome off of the old receiver wire.
Step 7: On the new receiver wire, align the opening of the dome with the receiver and slide the dome onto the receiver.
Step 8: Gently tug the dome to make sure it’s securely fastened. Note: This helps prevent the dome from falling off in your ear canal.
Copyright © 2016-2022 hearX IP (Pty) Ltd.
