Quick Start Manual

System Installation

Figure 7

Front features of the media

center

Connecting the speakers to the Acoustimass

module

CAUTION: Before you make any connections, be sure that the media center, the Acoustimass

module, and any additional equipment are not connected to AC power.

Your system may have Jewel Cube

speakers (image A on the left), which use a plug-in cable

connect, or cube array or single cube speakers (images B and C respectively,) which use a

two-wire cable. LIFESTYLE

DVD systems include five speakers.

Connecting the plug-in cable to Jewel Cube

speakers

Note: If your system has cube or cube array speakers, follow the instructions in “Making the

two-wire connections for cube or cube array speakers” on page 13.

The positive and negative wires of the plug-in cable are properly oriented for polarity and the

plug is designed to fit only one way into the jack.

1. Match the correct cable to the corresponding speaker location:

• Front speaker cables have blue RCA connectors on one end and speaker plugs at the

other end with L (left), R (right), or C (center) markings.

• Surround speaker cables have orange RCA connectors at one end and speaker plugs

at the other end with L (left) or R (right) markings.

Front door – Make sure you have

enough room to lift this door.

Disc tray – Make sure nothing blocks this

CD/DVD tray as it slides open.

Display window – Make sure you can see

this information while using your system.

The IR Emitter, which enables certain

remote control operation, is located here.