Quick Start Manual

Reference

Using Component video connections

Follow the connection diagram in Figure 23 to achieve the best video quality for DVD and

cable/satellite viewing, while adding a VCR to your home theater. Refer to “Component

video” on page 24, if necessary.

To watch DVDs and see LIFESTYLE

system menus, select the VIDEO 4 input on your TV,

or,

if your cable/satellite box has component jacks, connect them as shown in the diagram and

select VIDEO 4 on your TV. Select CBL/SAT on your LIFESTYLE

system remote.

Connect the VCR (VIDEO OUT) to an available VIDEO IN jack on your TV. Select that TV input.

Connect the VCR (Audio L and R OUT) to the TV Audio IN jacks on the media center and

select the TV source on your LIFESTYLE

system remote.

Figure 23

Component video

connection

Note: To make the connections shown in the diagram below, you will need additional cables.

Note: Two comonent video adapters are provided.

Component video adapter