Quick Start Manual

29
Reference
E
n
g
l
i
s
h
Connecting other components
Use standard RCA audio cables, matching the white (or black) connector to the L (left)
channel and the red connector to the R (right) channel. See Figure 25.
If the component is mono, use a Y adapter to connect it to the media center. Appropriate
cables and adapters are available at most electronic stores.
If the component has a digital output use the corresponding digital input beneath the set of
analog (L and R) inputs.
You could also use an optical connection, if the component has one. See Figure 27. You must
identify the optical source using the System/Media Center/Optical Source menu.
Connecting record/playback equipment
The rear panel of the media center provides input (AUX) jacks for listening to and output
(Audio OUT) jacks for recording to a cassette tape deck.
Figure 25
Record/playback
connections
Connecting other playback equipment
Other playback components such as an audio CD changer can be connected to the AUX or
other unused inputs on the rear panel of the media center.
Media center connector panel
Record/playback component
For listening
to tape
For recording
to tape