Quick Start Manual

Reference

Figure 26

AUX input connections

Using digital audio connections

If your TV, VCR, tape deck, or AUX component has digital audio output jacks, you may con-

nect them to the media center. In addition to the digital connection, be sure to connect L and

R stereo outputs from the component to the media center. This will provide uninterrupted

audio. See Figure 27.

• For a digital connection, use a 75Ω cable with RCA connectors (such as a video cable).

•For an optical digital connection, insert an optical digital cable into the Optical IN on the

media center rear panel. Use the Optical OUT jacks on the media center rear panel if you

plan to make a digital recording from that component.

Note: Before you can listen to a source through the OPTICAL input, you need to assign the

OPTICAL connection to that source: TV, VCR, CBL/SAT or AUX. See your operating guide for

instructions on using the system menus.

Figure 27

Digital audio and other

media center panel

connections.

AUDIO

OUT

CD changer or other playback equipment

Media center connector panel

Data port

Antenna extender

IR emitter

Digital audio connectionsOptical audio connections

Serial data