Quick Start Manual
18
BASIC SYSTEM CONNECTIONS
BASIC SYSTEM CONNECTIONS
EnglishDeutschFrançais DanskEspañolItalianoSvenska Nederlands ItalianoSvenska DeutschNederlands Français Español
Using a SCART adapter
The SCART adapter, for use with a SCART connector on a TV (of European manufacture), has
five connectors that plug into media center (Figure 15).
Use the appropriate setting on the connector, according to the type of connection you make:
• The connector is currently set for a Composite connection (V-IN).
• Set it for S-Video (a higher quality image) if your TV accepts that type of video signal (S-IN).
Note:
If you see only black and white on your TV screen after setting the SCART connector for
S-Video, set the connector back to Composite video (V-IN).
Figure 15
SCART connection with
switch set for Composite
video
TV Audio IN
jacks
TV
sensor
jack
Video OUT
Pass-through
connector for TV sensor
White
Red
Composite connector
(yellow)
Media center
connection panel
TV connection panel
Composite
setting
S-Video connector
S-Video
setting
You may now:
• Read and consider “Connecting audio for your TV sound” on page 19.
• Proceed to “Completing the system power connections” on page 21.
• Refer to “Optional Connections and Additions” on page 26 for information on connecting
other equipment to the system.
Note:
For information on how to set the LIFESTYLE
®
remote to control the TV, refer to your
Operating Guide.