Quick Start Manual

30
OPTIONAL CONNECTIONS AND ADDITIONS
OPTIONAL CONNECTIONS AND ADDITIONS
EnglishDeutschFrançais DanskEspañolItalianoSvenska Nederlands ItalianoSvenska DeutschNederlands Français Español
VCR connections
Most VCRs feature only Composite video output jacks.
• If you are connecting a VCR only, follow Steps 1 and 2 below.
• If you are connecting both a VCR and cable or satellite box, skip to !
“Cable or satellite box options” on page 31.
To connect your VCR directly to the media center
1. Using audio cables (with dual RCA connectors at each end), connect the left (L) and right
(R) audio outputs on your VCR to the L and R Audio IN jacks for VCR on the media center
rear panel (Figure 25).
2. Using a video cable (with one yellow RCA connector at each end), connect Video OUT on
the VCR to Composite Video IN on the media center.
Figure 25
VCR connection only
Media center connector panel
VCR
connector
panel
Yellow
Yellow
Red
White
Red
White
Video cable
Audio cable
Composite video
connection
to the TV
(yellow)
Note: Your components may look different from
those shown above. The connection jacks
and labels also may differ.