M O D E L A 1 PackLite TM POWER AMPLIFIER 2ZQHU¶V *XLGH Downloaded from www.Manualslib.
Svenska Nederlands Italiano Français Español Deutsch Dansk English Important Safety Instructions 1. 2. 3. 4. 5. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
English Dansk Deutsch Español Français Italiano Nederlands Svenska SAFETY INFORMATION Please read this owner’s guide Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this owner’s guide for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
Svenska Nederlands Italiano Français Español Deutsch Dansk English PACKLITETM POWER AMPLIFIER MODEL A1 Introduction Thank you for purchasing the PackLiteTM power amplifier Model A1 and joining the many thousands of musicians worldwide using the Personalized Amplification System™ family of products.
English Dansk Deutsch Español Français Italiano Nederlands Svenska PACKLITETM POWER AMPLIFIER MODEL A1 Unpacking Carefully unpack the carton contents. Save all packing materials in the rare case you need to transport your product for service. For convenience, please record the serial number and date of purchase on page 3. Check that the shipping carton contains the items shown in Figure 1.
Svenska Nederlands Italiano Français Español Deutsch Dansk English PACKLITETM POWER AMPLIFIER MODEL A1 The connector panel The A1 connector panel includes the features described in Figure 2. Figure 2 1 2 3 4 5 A1 connector panel 1 AC power connector: Accommodates the supplied AC power cord to connect your amplifier to the appropriate AC (mains) outlet. Check the product label of your amplifier for the voltage rating: 120V or 230V.
English Dansk Deutsch Español Français Italiano Nederlands Svenska PACKLITETM POWER AMPLIFIER MODEL A1 Top panel indicators The top panel of the A1 has two indicators that tell you the state of the amplifier. Figure 3 A1 top panel Signal indicator: GREEN when a signal is present at the input. RED when amplifier is over-driven and limiting function is activated to prevent damage to the connected loudspeaker. Power indicator: BLUE when amplifier is on and ready to use.
Svenska Nederlands Italiano Français Español Deutsch Dansk English PACKLITETM POWER AMPLIFIER MODEL A1 Figure 4 Typical setup INPUT OUTPUT Bass-Line OUT A1 amplifier B1 bass modules PS1 power stand B1 bass modules CAUTION: Do not connect more than two B1 bass modules to an A1 amplifier. CAUTION: Be careful not to connect the A1 amplifier to a B1 bass module that is already connected to the Amp 3 OUT connector of a PS1 power stand, or to another A1 amplifier.
English Dansk Deutsch Español Français Italiano Nederlands Svenska PACKLITETM POWER AMPLIFIER MODEL A1 4. 5. 6. Figure 5 Example of using multiple A1 amplifiers Using another ¼" TRS cable, connect the THRU connector on the first A1 amplifier to the INPUT connector of the next A1 amplifier. Connect a B1 bass module to the OUTPUT connector on each A1 amplifier. If desired, connect a second B1 to the first B1. Set power switch on both A1 amplifiers to ON (I).
Svenska Nederlands Italiano Français Español Deutsch Dansk English PACKLITETM POWER AMPLIFIER MODEL A1 Using the A1 in other applications The A1 amplifier can be used as a power amplifier in other system configurations. The A1 can drive other passive loudspeakers including subwoofers, floor monitors, studio monitors, and guitar cabinets.
English Dansk Deutsch Español Français Italiano Nederlands Svenska PACKLITETM POWER AMPLIFIER MODEL A1 Troubleshooting Problem What to do Power LED is not lit; the amplifier does not seem to operate. • Be sure power switch is ON. • Make sure the power cord is fully inserted into the unit and an AC outlet. • Be sure the AC outlet is live. Try operating a lamp or other equipment from the same AC outlet or test the outlet using an AC outlet tester. Power LED is RED, not BLUE.
Svenska Nederlands Italiano Français Español Deutsch Dansk English PACKLITETM POWER AMPLIFIER MODEL A1 Customer service For additional help in solving problems: • In the U.S. and Canada, contact the Bose® Live Music Customer Service Product and Technical Support Team at 877-335-2673 or visit the support area online at www.bose.com/musicians. Or, • Visit the Bose website of your country or call the corresponding support number as listed below.
English Dansk Deutsch Español Français Italiano Nederlands Svenska PACKLITETM POWER AMPLIFIER MODEL A1 Specifications Electrical Power, 4-ohm load . . . . . . . . . . . . . Power, 8-ohm load . . . . . . . . . . . . . Minimum loudspeaker load . . . . . . Signal to noise . . . . . . . . . . . . . . . . Voltage gain . . . . . . . . . . . . . . . . . . Input sensitivity . . . . . . . . . . . . . . . . Input sensing . . . . . . . . . . . . . . . . . Input impedance . . . . . . . . . . . . . . .
%RVH &RUSRUDWLRQ 7KH 0RXQWDLQ )UDPLQJKDP 0$ 86$ $0 5HY English Cropped 10-24-05, KS &&0 ZZZ ERVH FRP PXVLFLDQV Downloaded from www.Manualslib.
