Owner’s Guide │ Guía del usuario │ Notice d’utilisation
Important Safety Information Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy its advanced features. Please save this guide for future reference. All Bose products must be used in accordance with local, state, federal, and industry regulations.
Important Safety Information NOTES: • The product label is located on the bottom of the system. • Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. • The speaker wire and interconnect cables included with the system are not approved for in-wall installation. Please check your local building codes for the correct type of wire and cable required for in-wall installation.
Important Safety Information Information about products that generate electrical noise This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Important Safety Information AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. AirPlay, iPad, iPhone, iPod, iPod touch, iTunes, Mac and OS X are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used with a license from Aiphone K.K. App Store is a service mark of Apple Inc.
C ontents Introducing SoundTouch™ from Bose® Key Benefits................................................................................................. 8 Introduction About your SoundTouch™ music system....................................................... 9 System features.......................................................................................... 9 Setting up the System Unpacking the system.......................................................................................
Contents ADAPTiQ® Performing the ADAPTiQ® calibration............................................................ 23 Advanced Features Advanced button control.................................................................................. 25 Alternate setup method............................................................................ 25 Disabling Wi-Fi capability........................................................................ 26 Re-enabling Wi-Fi capability............................
Introducing SoundTouch™ from Bose® With SoundTouch™, you can stream Internet radio, music services (where available), and your music library. If you have Wi-Fi® at home, you’re ready to enjoy your favorite music in any room or outdoor space that you want. Key Benefits • Enjoy wireless access to Internet radio, music services (where available), and your music library. • Stream your favorite music easily with personalized Presets. • Works with your existing home Wi-Fi network.
Introduction About your SoundTouch™ music system The SoundTouch™ Stereo JC Wi-Fi® music system provides an elegant way to bring high quality sound wirelessly into any room. Use the free SoundTouch™ app to set up and control your system. See “Adding the system to your Wi-Fi network” on page 11. System features • Acoustimass® module and Jewel Cube® series II speakers for superior, clear sound. • SoundTouch™ controller provides control from up to 70 feet (21 m) away.
Setting up the System Unpacking the system Carefully unpack the carton and confirm that the following parts are included. Rubber Feet Acoustimass® module Jewel Cube® series II speakers ADAPTiQ® headset Speaker cables AC power cord USB cable (setup only) SoundTouch™ wireless adapter SoundTouch™ controller Save the carton and packing materials for transporting or storing the system. CAUTION: To avoid danger of suffocation, keep the plastic bags out of the reach of children.
Setting up the System Adding the system to your Wi-Fi® network Tip: A laptop is the preferred method for connecting to the network. If you must use a desktop computer, see “Appendix D: Using a desktop computer to connect to the network” on page 34. Before you can use the SoundTouch™ system, you must install the SoundTouch™ app onto a computer that is on your home network. Next, you will use the app to connect the system to the network. The app guides you through the setup process.
Setting up the System Connecting the system to your home Wi-Fi® network 1. Place the Acoustimass® module on a sturdy surface, close to an AC (mains) power source. 2. Connect the wireless adapter to the Bose link connector on the back of the Acoustimass® module. Bose link connector SoundTouch™ wireless adapter Acoustimass® module 3. On your computer, launch the app by double-clicking the SoundTouch™ app icon.
Setting up the System 6. When prompted by the app, plug the small end of the USB cable into the SETUP A connector on the SoundTouch™ wireless adapter. SoundTouch™ wireless adapter SETUP A connector 7. Plug the other end of the USB cable into a USB port on your computer. The app instructs you to enter your network credentials. 8.
Setting up the System Placing the speakers What you need: Acoustimass® Module Jewel Cube® series II speakers Rubber feet for Acoustimass module Note: You can mount the Jewel Cube® series II speakers on wall brackets, floor stands or table stands. To purchase wall mounting brackets, floor stands or table stands, contact your local Bose dealer or visit www.Bose.com. 1. Place the speakers on a sturdy, level surface; one to your left and one to your right: • 6-12 feet (1.8-3.6 m) apart.
Setting up the System CAUTION: • Do not stand the module on its front or back end. • Do not put electronic media such as video or audio tapes on or next to the module for long periods of time. The magnetic field surrounding the module may erase some or all of the recorded material. • Do not block the ventilation openings on the module. This can cause it to overheat. 2.
Setting up the System Connect the speakers What you need: Acoustimass® Module Speaker cables Note: See “Appendix A: Acoustimass® connector panel” on page 31 for details. 1. Lay the Acoustimass® module on its side. Insert the L (gray) speaker cable into the L (gray) connector on the Acoustimass® module. 2. Insert the other end of the L (gray) speaker cable into the left speaker connector, with the label facing down. 3.
Setting Up the System Placing the SoundTouch™ wireless adapter The SoundTouch™ wireless adapter provides the network connection for the SoundTouch™ Stereo JC Wi-Fi® music system. It must remain in range of the Wi-Fi router, and within 70 feet (21 m) of the SoundTouch™ controller. To keep interference to a minimum and to increase the strength of the Wi-Fi signal, place the wireless adapter outside of and away from metal cabinets, away from other audio/video components, and away from direct heat sources.
Controlling the System using the App Using the SoundTouch™ app The SoundTouch™ app is a software application that enables you to control the system from your computer, smartphone, or tablet. Using the app, your smart device acts as a rich remote for your SoundTouch™ system. The app enables you to manage your system settings, explore local and global Internet radio stations, set and change Presets, stream music to the system, view what is playing, plus much more.
Controlling the System using the App Downloading the app for your mobile device Bose® offers a free mobile version of the SoundTouch™ app so you can control the system from your smartphone or tablet. To install the app for your smartphone or tablet: • For iOS users: download the SoundTouch™ controller app from the App Store. • For Android™ users: download the SoundTouch™ controller app from the Google Play™ Store.
Using the System Playing music with the SoundTouch™ controller During the setup process, you were prompted to connect the SoundTouch™ controller to the system. If your SoundTouch™ controller is not connected, launch the SoundTouch™ app and click EXPLORE > SETTINGS > Systems, select your system, and click CONNECT SOUNDTOUCH CONTROLLER. You can use the SoundTouch™ controller to play and manage your Presets.
Using the System Playing an AirPlay stream from an AirPlay compatible device In addition to playing content from Internet radio, music services (where available), and your music library, you can also stream audio from an AirPlay device on the same Wi-Fi network. 1. Start a music app on your AirPlay device. Tip: Adjust the volume on the AirPlay device to 75 percent of maximum to ensure optimal volume control from the SoundTouch™ Stereo JC Wi-Fi music system. 2.
Personalizing your Presets How Presets work You can personalize six Presets to your favorite streaming music services (where available), stations, playlists, artists, albums, or songs from your music library. You can access your music at any time with a simple touch of a button on the SoundTouch™ controller. Tip: You can also access your Presets using the SoundTouch™ app on your computer, smartphone, or tablet. See “Using the SoundTouch™ app” on page 18.
ADAPTiQ® Performing the ADAPTiQ® calibration What you need: ADAPTiQ® headset SoundTouch™ controller The ADAPTiQ® audio calibration system customizes the sound of your system to the acoustics of your listening area. Note: You must complete SoundTouch™ setup before performing ADAPTiQ® audio calibration. See “Adding the system to your Wi-Fi® network” on page 11. To perform a calibration, you need about ten minutes when the room is quiet.
ADAPTiQ® 3. Press and release ADAPTiQ on the Acoustimass® module connector panel. The system announces the selected language. ADAPTiQ® button To select a different language, press ADAPTiQ repeatedly until you hear the language you want. 4. Place the module in its final position and orientation (standing on its feet or laying on its side). Make sure the opening at the front of the module faces into the room. 5. Click the screen on the SoundTouch™ controller to continue in the selected language.
Advanced Features Advanced button control The SoundTouch™ wireless adapter provides advanced functionality through the press and hold of the Control button. Alternate setup method Using this method you can set up your SoundTouch™ system by first joining its own built-in Wi-Fi® network, and then connecting to your home Wi-Fi network. Note: You may use this method to set up your system as an AirPlay device only.
Advanced Features 6. On your computer, tablet, or smartphone, return to the Wi-Fi control panel and rejoin your home Wi-Fi network. 7. Once the system is on the network, follow these steps to complete setup: A. Download and launch the SoundTouch™ app. B. On the SOUNDTOUCH™ SYSTEM SETUP screen, select this option: IT IS ALREADY CONNECTED. Note: For more information on setup, see “Installing the SoundTouch™ app” on page 11.
Care and Maintenance Adding a Wi-Fi® network If your network information has changed, or to connect your system to another network, you must add the new network information in the app on your computer and then connect the system. 1. Launch the SoundTouch™ app. 2. Click EXPLORE > SETTINGS > Systems. 3. Select the system. 4. Click CONNECT TO A WI-FI NETWORK. 5. Follow the instructions on your computer.
Care and Maintenance Problem What to do Cannot hear an • Ensure system and AirPlay device are connected to the same network. AirPlay stream • Ensure AirPlay device is playing; increase its volume. • Ensure system is selected in the AirPlay menu of the device. • Move AirPlay device away from possible interference and closer to the wireless router or network access point. Note: Proximity of the AirPlay device to the system is not important, only to the wireless router or network access point.
Care and Maintenance Cleaning To clean the SoundTouch™ Stereo JC Wi-Fi® music system, wipe the enclosures using a soft, dry cloth. You can also lightly vacuum the grille on the speakers. • Do not use solvents, chemicals, or sprays. • Do not allow liquids to spill or objects to drop into any openings. Customer service For additional help using the system, contact Bose customer service. See the contact list included with your SoundTouch™ Stereo JC Wi-Fi music system.
Technical Information SoundTouch™ Acoustimass® module Dimensions and weight • 8.0"W x 21.7"D x 13.0"H (20.7 cm x 55.2 cm x 33.2 cm) • 26.2 lb (11.9 kg) Power rating 100-120/220-240V 50/60Hz 350W Power consumption (OFF mode): <=4W Temperature range 32° F to 104° F (0° C to 40° C) Jewel Cube® series II speakers Dimensions and weight • 2.5"W x 2.5"D x 6.2"H (6.5 cm x 6.5 cm x 15 cm) • 1lb (.
Apendices Appendix A: Acoustimass® connector panel The Acoustimass® module connector panel includes speaker connectors, the ADAPTiQ® calibration system connectors and button, and an power connector. Bose® link connector ADAPTiQ button AC Power connector Left and right speaker connectors ADAPTiQ connectors Connector Description Left and right speaker connectors Used with the provided stereo cables to connect the Jewel Cube® series II speakers.
Apendices Appendix B: Wall mounting the SoundTouch™ wireless adapter You can mount the adapter on a wall (hardware not included). See “Mounting hardware specifications” for the correct hardware. Mounting hardware specifications Item Wood Wallboard Wall thickness 1 in. (25.4 mm) or thicker ⅜ in. (9.5 mm) or thicker Drill bit ⅛ in. (3.17 mm) ³/16 in. (4.76 mm) Pan-head wood screws (2) #8x1¼ in. (32 mm) #8x1¼ in. (32 mm) Plastic wall anchors (2) Not used #6-8x1 in. (25.
Apendices Appendix C: Wall mounting the SoundTouch™ controller WARNING: The wall mount bracket contains magnetic material. Please contact your physician if you have any questions whether this might affect the operation of your implantable medical device. Follow these instructions to wall mount your SoundTouch™ controller. Use the bracket as a template to mark the holes. Wallboard (anchors and screws supplied): 1. Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.
Apendices Appendix D: Using a desktop computer to connect to the network If you have a desktop computer, temporarily move the Acoustimass® module and SoundTouch™ wireless adapter near the computer to set up the W-Fi® network connection. The diagram below shows how to temporarily set up your Acoustimass® module and SoundTouch™ wireless adapter near your desktop computer. Once you have the components in place, follow the procedures in this guide to connect to your network.
Apendices English - 35
©2014 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA AM719722 Rév.
