Operation Manual
Table Of Contents
- Introduction
- Welcome
- Product overview
- Controls and indicators
- Connection panel
- System Setup
- Unpacking
- Removing/attaching the cover
- Mounting options
- Connecting the T1 to an L1TM model II power stand
- Connecting the T1 to an L1 model I power stand
- Connecting the T1 ToneMatchTM audio engine power supply (optional)
- Connecting the T1 to your computer
- Operating Instructions
- Optimizing input gain and output volume
- Using the Master volume control
- Muting a channel
- Muting channel effects
- Reading the T1 display
- Using the T1 rotary selector
- Editing the sound of a channel
- Selecting a ToneMatch™ preset
- Adjusting zEQ
- Adjusting Para EQ
- Using compressor/gate functions
- Using the KickGate
- Using modulation effects
- Adding delays
- Adding reverb
- Routing input signals to the Aux output
- Using the tuner
- Using global functions
- Selecting a type of reverb
- Using the Prefs utilities
- Loading and saving scenes
- Sharing a scene
- Bose scenes
- Factory Settings
- Singer/Songwriter
- DJ/Playback
- Drums and Bass
- The Works scene
- Factory Settings
- Care & Maintenance
- Cleaning
- Limited Warranty and Registration
- Accessories
- Troubleshooting
- Technical information
iv
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
SAFETY INFORMATION
Please read this owner’s guide
Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system
properly and enjoy its advanced features. Please save this owner’s guide for future reference.
WARNING:
•T
o
reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
•
The
T1 power supply and the T1 ToneMatch
TM
audio engine shall not be exposed to dripping or splashing, and objects
filled with liquids, such as vases, shall not be placed on the apparatus. As with any electronic products, use care not to
spill liquids into any part of the system. Liquids can cause a failure and/or a fire hazard
.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
Notes:
• The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or on boats.
• The product label is located on the bottom of the product.
• The T1 ToneMatch audio engine must be powered only by an L1
TM
model II power stand or a T1 ToneMatch audio engine
power supply.
• The mains plug is used as the disconnect device and should remain readily operable. To completely disconnect the
apparatus from the mains, disconnect the mains plug from the mains outlet.
This product conforms to the EMC Directive 89/336/EEC and to the Low Voltage Directive 73/23/EEC. The complete
Declaration of Conformity can be found on www.Bose.com/static/compliance/index.html.
©2007 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without prior
written permission.