Operation Manual
Table Of Contents
- Introduction
- Welcome
- Product overview
- Controls and indicators
- Connection panel
- System Setup
- Unpacking
- Removing/attaching the cover
- Mounting options
- Connecting the T1 to an L1TM model II power stand
- Connecting the T1 to an L1 model I power stand
- Connecting the T1 ToneMatchTM audio engine power supply (optional)
- Connecting the T1 to your computer
- Operating Instructions
- Optimizing input gain and output volume
- Using the Master volume control
- Muting a channel
- Muting channel effects
- Reading the T1 display
- Using the T1 rotary selector
- Editing the sound of a channel
- Selecting a ToneMatch™ preset
- Adjusting zEQ
- Adjusting Para EQ
- Using compressor/gate functions
- Using the KickGate
- Using modulation effects
- Adding delays
- Adding reverb
- Routing input signals to the Aux output
- Using the tuner
- Using global functions
- Selecting a type of reverb
- Using the Prefs utilities
- Loading and saving scenes
- Sharing a scene
- Bose scenes
- Factory Settings
- Singer/Songwriter
- DJ/Playback
- Drums and Bass
- The Works scene
- Factory Settings
- Care & Maintenance
- Cleaning
- Limited Warranty and Registration
- Accessories
- Troubleshooting
- Technical information
46
EnglishDeutschEspañolFrançaisItalianoNederlandsSvenska Dansk
FACTORY SETTINGS
This section describes the settings in the T1 audio engine when it left the factory. To restore your T1 at any time to
these factory settings, load Bose
®
Factory Settings scene.
Comp/Gate factory settings
Type Thresh Gain
Compressor 1: Light –16.0dB 3.0dB
Compressor 2: Medium –16.0dB 5.0dB
Compressor 3: Heavy –16.0dB 8.0dB
Limiter –10.0dB 0dB
De-Esser –10.0dB 0dB
Thresh Speed
Noise Gate –70.0dB 50%
Thresh Tight
KickGate1: Regular –20.0dB 100%
KickGate2: Fast –20.0dB 100%
Modulator factory settings
Type Mix Depth Speed
Chorus 1: Brite 50% 50% 0.50Hz
Chorus 2: Warm 70% 100% 0.15Hz
Chorus 3: Dark 25% 25% 3.0Hz
Flanger 1: Tape 50% 50% 1.00Hz
Flanger 2: Feedback 50% 100% 2.00Hz
Speed Feedback
Phaser 1: Stomp 0.50Hz 0%
Phaser 1: Rack 0.50Hz –75%
Phaser 1: Warm 1.00Hz –26%
Phaser 1: Bright 0.50Hz –76%
Speed Depth
Tremolo 5.00Hz 50%