Specification

0929(S) SERIES
PVC MOLDED-IN-PLACE
BALL VALVES
© Copyright 2016 Boshart Industries Inc. All Rights Reserved. Printed in Canada 03-2016
BII-0929(S)-0316(1186PV)
25 Whaley Ave., Milverton, Ontario, Canada N0K 1M0
Tel: [phone] Toll Free: (800)-561-3164
Fax: [phone] Web: www.boshart.com
Specification:

Threads conform to ANSI/ASME B1.20.1

Slip connections conform to ASTM D2466

Working Temperature Range: 41°F to 122°F (5°C to 55°C)

Max Pressure Rating: 150 PSI @ 73°F(22°C)

White PVC body, suitable for both schedule 40 & 80 pipe

Stem seal material: EPDM o-ring

Seat material: EPDM

Black ABS Handle
Certification:

NSF/ANSI Standard 372 Certified
DIMENSIONS
Part No.
Threaded
Nominal
Size
d D H L Weight
Part No.
Slip
inches mm inches mm inches mm inches mm grams
0929-05 1/2" 0.59 15 1.24 31.4 1.78 45.3 2.94 74.7 95 0929S-05
0929-07 3/4" 0.79 20 1.45 36.8 2.00 50.9 3.39 86.2 144 0929S-07
0929-10 1" 0.98 25 1.77 45.0 2.26 57.3 4.05 102.8 220 0929S-10
0929-12 1-1/4" 1.26 32 2.07 52.5 2.66 67.5 4.34 110.2 326 0929S-12
0929-15 1-1/2" 1.42 36 2.49 63.2 2.91 73.8 4.83 122.7 467 0929S-15
0929-20 2" 1.81 46 3.01 76.4 3.32 84.3 5.67 144.1 708 0929S-20
0929-25 2-1/2" 2.48 63 3.54 90.0 4.07 103.5 7.17 182.0 1120 0929S-25
0929-30 3" 3.15 80 4.25 107.9 4.47 113.5 9.25 235.0 2140 0929S-30
0929-40 4" 3.81 97 5.21 132.4 4.89 124.3 10.08 256.0 3030 0929S-40
Temperature Correction Factor for PVC Valves
As temperature increases, working pressure decreases. The optimal working pressure for PVC valves is 150 PSI @ 73°F (22°C)
If the temperature increases above 73°F (22°C), use the PVC correction factor to determine working pressure.
Multiply the maximum working pressure by the correction factor.
Temperature 73°F (22°C) 90°F (32°C) 100°F (38°C) 110°F (38°C) 120°F (49°C) 130°F (54°C) 140°F (60°C)
PVC Correction Factor 1.00 1.00 1.00 0.83 0.66 0.50 0.33
MATERIAL LIST
No. Description Materials
1
Screw Steel
2
Cap ABS
3
Handle ABS
4
Ball PVC
5
O-ring EPDM
6
Body PVC
7
Seat EPDM