Installation Guide

ROWLINSON GARDEN PRODUCTS LIMITED
Green Lane
Wardle, Nr. Nantwich
Cheshire
CW5 6BN
Help Line (Normal Office Hours) 01829 261 121
English SS165B
Assembly Instructions
Wrenbury arch
No. Fixing Kit Qty.
5 15mm bolts 8
6 38mm bolts 20
8 Plastic caps 28
9 Allen key 1
10 Fixing pegs 4
No. Components Qty.
1Uprights 2
2 Crossbeams 2
3 Lattice arches 2
4 Rafters 6
2
1
3
4
2014 © Rowlinson Garden Products
Before assembly
•
We recommend that time is taken to read the instructions before
starting assembly, then follow the easy step by step guide.
The instruction sheet is only a guide to the assembly.
Certain items may not be shown to scale.
•
This product should be assembled by no less than two people.
•
Never attempt to erect the assembly in high winds.
Recommended tools for assembly
•
Allen key supplied with kit
x 2
3. Rafters
Interlock each of the rafters on the crossbeams and secure in place using
2x35mm bolts per rafter. Push the bolts through the top of the rafters and
screw into the top of the cross beams.
We constantly improve the quality of our products,
occasionally the components may differ from the
components shown and are only correct at time of printing.
We reserve the right to change the specification of our
products without prior notice.
1. Crossbeams to uprights
Using 4 x15mm bolts per crossbeam, secure the beams as shown to the tops
of the uprights.
2. Lattice arches
Position the lattice arches between the uprights as shown and secure each
arch using 4 x 35mm bolts. push the bolts through the holes at the ends of the
lattice and screw into the upright legs.
15mm
38mm
38mm
Washer
Washer
Washer
7 Washer 28
Plastic
Cap
Plastic
Cap
Plastic
Cap