User Manual

OPERATION
6
17.
14. MUTE
15. USB PORT
16. AUX IN JACK
18. RESET
To reset all parameters to factory default values. Press the button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET
hole.
The USB port of this car radio is designed for media playback from flash memory devices and
charging for iPhone / andriod mobile phone. The charging current consumption is 1 ampere.
flash on the LCD
o
detach
13.BND/AMS
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1、F2、F3 for FM band,
and A1, A2 for AM band will be shown on the LCD display.
control to scan each preset station in each band.
AMS button on the remote
Press the BND/AMS check
During USB or SD playback, short press the BND button on the remote control to enter track search
mode, then rotate the VOL knob to select the number of your favorite track with high speed, then press
the SEL button to confirm and play the selected track.
If no any operation in 5 seconds, it will play the current track.
When the 6 strongest stations will be stored into
In the USB or SD card mode:
Briefly press the or button to play the the next or previou track.
Press and hold the or button to fast forward or fast backward.