Installation manual

GEM INSTALLATION MANUAL DOCUMENT No. 070906 REV. 1.3
INSIGHT
INSTRUMENT CORP. 17 BOX 122, FORT ERIE, ONTARIO, L2A 5M6
FLIGHT TESTING THE GEM
It is essential that the G-series GEM installation be flight tested.
The GEM must be observed in all phases of flight for consistency in performance. If a problem is noted during
the flight test, discontinue the flight test and trouble-shoot the system.
Should you have any questions or problems during installation or trouble-shooting of the GEM don’t hesitate
to contact Insight Product Support. Please be ready to supply aircraft and engine type, GEM model and serial
number and software version.
WEIGHT and BALANCE DATA
1 G-series GEM Instrument 0.5 lb
6 Clamp EGT Probes 9 oz.
6 Spring CHT Probes 6 oz.
6 Gasket CHT Probes 4 oz.
1 Adapter CHT Probe 1 oz.
1 TIT Probe 1 oz.
1 Oil Temperature Probe 1 oz.
1 Oil Pressure Sensor 2 oz.
1 Vibration Sensor 1 oz.
1 Fuel Flow Sensor 6 oz.
1 FF Signal Adapter 1 oz.
1 Carburetor Temperature Probe 1 oz.
1 8 ft Wiring Harness 14 oz.
1 24ft Wiring Harness 34 oz.