Installation manual

610C-001 INSTALLATION MANUAL DOCUMENT No. 070906 REV. 1.2
INSIGHT INSTRUMENT CORP. BOX 122, FORT ERIE, ONTARIO, L2A 5M6
If you have difficulty installing or using a G3 system, please read the G3’s documentation. Every G3 system is
shipped with complete instructions for installation and use on a CD. You may also find the same information on
our website www.insightavionics.com under G3 Documentation.
The answers to many technical questions can be found in these documents. Insight provides customer support
free of charge for as long as you own the instrument. If you have any questions concerning G3 operation do
not hesitate to call.
The Customer Service department accepts calls Monday through Friday between 9 am and 5 pm EST. Be sure
to have your instrument model number and serial number(s) ready when you call.
GEM Model No.
GEM Serial No.
Aircraft Type
Educational Video
To assist our customers in installing and using GEMs, Insight has produced an educational CD entitled Modern
Engine Management. Our video is available free of charge. Call or write to obtain your personal copy of this
classic production.
Service Procedures
Like many modern electronic devices, the Graphic Engine Monitor is extremely reliable. Other than initial con-
figuration during installation, the G3 requires no adjustment or routine maintenance. The G3 routinely performs
a self-test on power-up to test its vital functions. Should the G3 fail this test, it will halt on a red screen with a
description of the error. Errors of this nature must be returned to the factory for service.
If the instrument performs the self-test successfully but you feel that the instrument is not functioning as ex-
pected discuss the problem with your dealer, or consult the troubleshooting section of the GEM Installation
Instructions. Keep in mind that in the vast majority of cases, erratic or unusual GEM operation can be traced to
an installation problem, a problem with probes, wiring harness or the aircraft’s electrical system.
Due to its reliability and the extensive testing that it undergoes, the instrument itself is the least likely source of
trouble. For this reason we strongly encourage you to contact Insight Customer Service at one of the numbers
listed below before returning an instrument to the factory, or any time you have any questions concerning the
operation of the Graphic Engine Monitor. By contacting us first we may be able to assist you in correcting your
problem without the hassle and downtime of sending in an instrument that is not the source of the difficulty.
Technical Support Contact Phone Numbers:
[phone]
Web: www.insightavionics.com
E-mail: [e-mail]
32/32