Installation manual

610C-001 INSTALLATION MANUAL DOCUMENT No. 070906 REV. 1.2
INSIGHT INSTRUMENT CORP. BOX 122, FORT ERIE, ONTARIO, L2A 5M6
INTRODUCTION
This Installation Manual will acquaint you with the installation requirements, operational functions and some
of the powerful features of the advanced 610C Graphic Engine Monitoring (G3). Please read it carefully and
completely before starting.
Insight Instrument Corp.’s G3 Graphic Engine Monitors provides simultaneous analog and digital) display of
engine temperatures for nearly all makes and models of piston-powered aircraft. These displays are designed
for rugged use. However, since they are constructed of computer-type components, standard precautions for
electronic equipment are required;
• Do not expose to rain or water.
• Handle with care - DO NOT DROP.
• Be sure that all electrical connections are correct and properly made.
• Follow anti-static procedures.
Temperatures are sensed through thermocouple type probes, which are installed in the engine (and other ar
-
eas) for temperature data gathering. These probes are crucial to the proper and accurate operation of the GEM
display. Therefore, utmost care must be exercised during installation in the aircraft.
The GEM Model G3 displays are configured at Insight.
For a comprehensive description of functions and features, consult the G3 Pilot’s Guide.
Unpacking the G3 Graphic Engine Monitor Display
• Carefully inspect the contents of this package for damage. If damage is found, save all
packaging so that a claim can be made against the carrier.
• Inspect the contents of the shipment to ensure that all component parts and materials
have been supplied.
• Visually inspect all components for proper identification or damage.
• Immediately report any discrepancies to the Insight Customer Service Department.
6/32