User`s manual
iPod
Dock
adaptors
The
75001
comes with a set
of
special iPod adaptors which fit a wide range
of
iPod
models. These are specially designed for use with the 75001, and hold the iPod firmly
to
the
dock
connector when the vehicle is in motion.
Please install the appropriate
dock
adaptor as described below.
PLEASE
NOTE: .
"Official"
Apple
Universal
Dock
Adaptors cannot
be
used
in the
75001.
Do
not
attempt to connect
your
iPod to the
dock
without the appropriate, specially-designed
adaptor
provided
with the
75001.
BOSS
Audio
Systems cannot
accept
any
responsibility
for
any damage
or
data loss that
may
result from using
your
iPod
in the 75001
and
the specially-designed
dock
adaptors.
1. Push on the face
of
the LCD
to
release
and open the iPod docking drawer.
Dockadaptor------~
2.
Select the appropriate size
dock
adaptor
for your iPod. Lower it into the recess
in
the drawer, aligning the notches/tabs on
the FRONT edge first.
Slots on
top
edge
of
faceplate
--
.......
3. As you lower the
dock
into the recess,
be sure
to
align the tabs on the
REAR
edge
of
the
dock
adaptor with the slots on the
top edge of the faceplate, and slide it down
securely into place.
4.
Insert your iPod into the
dock
adaptor.
Press PLAY/PAUSE
to
begin playback.
75001 User's Manual - page 4