4 10 R - 02 1011
Warnings When Driving Keep the volume level Iow enough to where it allows you to be aware of the road and traffic conditions. CAUTION In some countries, it's unlawful to operate a vehicle while video is displayed in the driver's viewing area. Please always switch the unit's display to "Font Type Display" mode by pressing the DISP button while driving. For safety reason, the driver should only enjoy / watch the video while the car is in parking mode.
Installation Attach the trim ring INSTALLATION CAUTION 1. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly. 2. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause mal functions. 3. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. 4.
Connecting the System Wiring Diagram - Power / Speakers ANTENNA EXTENDER CABLE ANTENNA JACK PINK PARKING BRAKE ( ) VIDEO IN SUB-W VIDEO OUT 1 AUDIO IN L FUSE CAMERA AUDIO IN R Connect to Parking Brake. (Not supplied) RCA-TO-RCA CABLES WHITE L-CH GREY REAR CHANNEL R-CH RED AMP L-CH WHITE FRONT CHANNEL Ground RED R-CH Brake Switch 2.
Name Of Buttons and Theirs Functions Source Unit No. 9 10 13 1 2 3 2 3 6 14 Press this button to turn the mute On / Off. PWR (POWER) Press this button or any other button on the front panel to turn the unit on. Hold & press this button again to turn the unit off. (PLAY/PAUSE) Press this button to Pause / resume Play the music under Media player mode.
Name Of Buttons and Theirs Functions 6 Press this button to eject the Disc. (EJECT) 7 Under the tuner mode, press this button access Auto Seek mode. Under the media player mode, press this button to skip backward of the previous chapter. 8 Under the tuner mode, press this button access Auto Seek mode. Under the media player mode, press this button to skip forward of the next chapter. 9 VOLUME + _ Press this button to increase the volume. 10 VOLUME 11 DISC SLOT Insert the disc into CD slot.
Name Of Buttons and Theirs Functions Remote Control 9 2 1 7 8 3 4 12 10 13 5 11 16 14 17 18 19 23 20 24 15 25 21 6 26 22 No. Button 1 2 Decriptions Item POWER ON When the unit is power on, long press this button to turn Off OFF the unit. Once the unit power off, press this button to turn On the unit. MUTE Press this button to turn the mute On / Off. SOURCE Press this button to enter into the SOURCE mode. Long press this button to enter into the Bluetooth transfer mode.
Name Of Buttons and Theirs Functions UP/DOWN Use these buttons to move cursor up/down/left/right. LEFT/RIGHT 9 Under the tuner mode, press this button access Auto Seek mode. Under the media player mode, press this button to skip backward of the previous chapter. Under the tuner mode, press this button access Auto Seek mode. Under the media player mode, press this button to skip forward of the next chapter.
General Operations 1 2 3 SOURCESETUP 4 Under the SOURCE menu, the below options are available for selection: NOTE Please note not all the Optional Source / feature is available with each unit. P3 94.70 POWER OFF Tap button to power off the unit, and the below display will be shown on TFT: 5 6 7 8 1 HOME MENU See You Tap button on the display enter into the Home Menu, and there have SETUP, SOURCE,OFF options for selection.
General Operations TIPS 6 iX-BASS DEMO display mode demonstrates the major highlight functions that are available on this unit. Tap Tap button is Monitor Off mode 7 SUBWOOFER TIPS Tap 8 MUTE BUTTON NOTE Tap button to mute on the audio volume, Tap this button again to restore volume to the previous setting. Tapping button switches thru each of the three different Motion Picture modes. The TFT screen will have around 1-2 seconds ‘BLANK’ screen (dark screen).
SetUp Menu Operations 1 3 5 Middle 7 1. Level: adjust the Middle level from -06 to + 06. 2. C.Freq: adjust the Middle Range center frequency as 500Hz, 1KHz, 1.5KHz, or 2.5KHz. 3. Mid.q: adjust the desired Middle Quality Factor to 1N, 2N, 1W or 2W. Balance To adjust the Balance between the right and left speakers from R12 to L12. Balance Center for this unit is Balance C00. 2 4 6 Fader 8 To adjust the Fader between the front and rear speakers from R12 to F12.
SetUp Menu Operations 3 PRESET EQ SETTING Paired (audio) Tap button to access into the EQ Menu. Under the Preset EQ Setting, there are the below 8 different types of preset equalizer available for user selection. In this Menu will displayed the list of Paired Audio Device with this unit. NOTE This unit can paired up to 8 devices with Handsfree and / or Audio Device.
SetUp Menu Operations My Gallery Dimmer This unit contains 10 pre-loaded images. User can select these 10 pre-loaded images set as wallpaper on the playback mode. To adjust the TFT Backlight level between High / Mid / Low. Calibration My Image This unit allows the user to self-capture from VIDEO or JPEG picture. User can select these 10 pre-loaded pictures set as Wallpaper. Tap button on the Display Setting menu screen to start the Calibration setting.
Tuner Operation Local Seek This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader range of signals. To set the unit to select only strong local stations during automatic tuning, tap bar to select the local ON/OFF. BAND 1 6 2 3 4 Under the SOURCE menu, tap access into the Tuner playback mode.
Media Player Operations (Disc/USB/SD Card) This unit can play various video/audio formats stored into Disc / USB or SD Card on Media Player. The following chart helps you to check if a disc is supported by this unit, as well as what functions are available for a given disc type. Disc format Unsupported Discs 8 cm Disc CDV, CDI, CDG, LD DVD RAM Note on Region Code DVD players and DVD Video discs have their own Region Code numbers. This unit can play the disc of all region ALL code numbers.
Media Player Operations (Disc/USB/SD Card) Get into the SOURCE menu to select Disc, USB, SD Card Media Player playback mode. Repeat ONE: play the current track repeatedly. FOLDER: play all track sin the current folder repeatedly. General Operation OFF: Repeat Off to cancel all the Repeat function. Random During the disc playback, select Random “On” to play all tracks on a Disc in Random order, select Random “Off” will stop the Random play.
Media Player Operations (Disc/USB/SD Card) Insert the SD Card Click Mode Change to SD Card After a SD Card was inserted into the main unit card slot. The unit will automatically start playing the files contained on the SD Card. NOTE If no SD Card is inserted into the main unit card slot, the unit will return to previous mode.
DVD Operations Once a DVD disc is inserted into the unit, the unit will automatically start the playback from the beginning of the disc. NOTE If the DVD menu appears, touch the display in the desired place to show the controls for item selection. ANGLE Touch button while playing a scene recorded with multiple angles to change the angle. TOP MENU Touch button to bring up the Top Menu on the DVD. NOTE Some of the above features may not be available, depending on the type of disc.
DVD Operations 5 FUNCTION MENU DVD Setup Tap button access into the Function Menu, and there are have below options for selection: Under the DVD Setup mode, there are have below options for selection: Aspect Ratio: Selecting the TV Aspect setting allows the user to select the aspect ratio of the TV (DVD and VCD only). The following options are available: 4:3 = Aspect ratio of TV is 4:3. 16:9=Aspect ratio of TV is 16:9. Both wide screen and 4:3 contents will fill the entire screen.
MPEG4 Opeartions The unit is support playback MPEG4 files , Tap button enter into the Disc List to select Central European = Include Albanian, Croat, Czech, Dutch, English, German, Hungarian,Irish, Polish, Romanian, Slovak, Slovene and Sorbian. Cyrillic = Include Bulgarian, Belorussian, English, Macedonian,Moldavian, Russian, Serbian and Ukrainian. the Movie mode to light up the MPEG4 playback. NOTE OPEN The details operation is exactly the same as Media Playback operation.
Dual Zone Operation This unit is equipped with the most advance “Dual Zone” feature. This function is useful if the user would like to select different modes of the Audio and Video output source for Front and Rear Speakers and TFT Screens. For example, user can select to listen to Tuner music for front speakers and rear speaker for DVD movie. To Switch On Dual Zone Mode 1. “Off” is the default setting. 2. Under SETUP menu, tap button access into the Dual Zone mode, and then tap select to 2-Zone on. 2.
AV-In Mode Select the AV Mode You can connect up to 2 optional devices, tap button on display to enter into the AV mode. AV - 1 = Front panel AV in AV - 2 = RCA back of unit Tips Be sure to connect Parking Brake connection lead. ( please see more details on “ Wiring Diagram.”) NOTE AV -1 This unit is allowed to connect with external Audio/Video system such like Digital Camera or Game Console. User can connect the external A/V system thru the A/V in jack on front panel.
Wallpaper Setting Setting the Background Screen (Wallpaper) 2. Hold press the CAPTURE button for more than 3 seconds when the desired scene or image appear on the TFT screen. This unit allows the user to change the background screen on the playback mode. This function is called wallpaper change. User can select the desire image on the below operation to set as wallpaper. 3. The confirmation display will appear to confirm the image is stored in to MY IMAGE.
Bluetooth Operations User Guide For Bluetooth 1. When user use our Bluetooth HEAD UNIT, please make sure the mobile phone you use must / does support Bluetooth functions (Headset or Handsfree profiles or both). 2. Before you start to use our Bluetooth HEAD UNIT, please make sure complete pairing with your mobile phone first. Please refer to the user manual, section “PAIRING” for detail “PAIRING” instruction.
Bluetooth Operations Handsfree Operation 3. When searching is completed, the detected device name(s) will be displayed in a list. Pairing, Connecting And Deleting With A Bluetooth Device 4. Tap the device name you want to be connected/paired with the selected device in the list. When connecting Bluetooth devices at the first time with this unit, a mutual registration is required, this is called “Pairing”.
Bluetooth Operations Pairing The Bluetooth System Between Mobile Phone & The Unit 1. Open your Mobile Phone and switch Bluetooth to on, and search Bluetooth device. 2. “BT70” should appear in the pairing list on the Mobile Phone. User need to select “BT70” and then input the password “0000”, the below display will be show on TFT: Disconnecting of the Bluetooth System User can disconnect the connected Bluetooth device as follows: 1. Access into the SETUP MENU of Bluetooth Menu_Paired (Handfree). 2.
4. To end the conversation, tap button. The unit will switch back to the previous mode automatically and release the mute of the previous mode at the same time. NOTE Tap button to confirmed the An Incoming call under stand by mode (Ignition on & Power Off), the system will automatically switch on the head unit. selection to delete. 3. If the delete is successful, the below display will be show on the TFT: Rejecting An Incoming Call User can tap incoming call.
Bluetooth Operations 2. Once the phone number has been entered completely, tap button to start dialing the call, and the below display will show on the TFT: NOTE After the tapped button, the present mode will be muted at the same time, user can press the button to release the Mute. When making an outgoing call, it's not possible to CALL TRANSFER if the call is not being answered yet. It's only possible to Transfer the call to Mobile Phone after the call is being answered. 3.
Bluetooth Operations Bluetooth Audio Operation TIPS Bluetooth Audio Streaming A2DP (Advanced Audio Distribution Profile) User can listen to music files on an audio device on this unit if the audio device supports A2DP (Advanced Audio Distribution Profile) of Bluetooth Technology. Please read the below instruction before operating the Bluetooth Audio streaming function on this unit.
Bluetooth Operations 6. Stop playback - by changing mode into any other mode of this unit. NOTE When you change to Bluetooth Audio mode, some audio devices will automatically start playback. Some phones may require you to choose 'Media Player' mode on your phone. If the auto playback is not supported on the audio device, please refer to the instruction manual for the audio device on how to operate music playback via Bluetooth wireless technology.
Specifications TFT Screen Section Screen Size: 6.1 (Measured Diagonally) Screen Type: TFT Liquid Crystal Display active matrix Resolution: 480 x 234 DVD / CD Section Compatible Disc/Format Signal to Noise Ratio Dynamic Range Frequency Response Channel Separation See “ Disc Note” for more details description > 90 dB > 90 dB 20Hz to 20Khz +/-3dB 2 Channel (Stereo) >60dB @1khz Video Section Color System Video Output Video Input NTSC / PAL Composite 1.0 Vp-p (+/- 0.2) 75 - ohm Composite 1.0 Vp-p (+/- 0.
Troubleshooting Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer. Symptom Cause Solution No power The car ignition is not on. The fuse is blown. Replace the fuse. Disc cannot be loaded or ejected Presence of CD disc inside the player. Remove the disc in the player, then put a new one. Inserting the disc in reverse direction. Insert the compact disc with the label facing upward.
