User’s Manual BV9982U IN-DASH DVD/MP3/CD AM/FM RECEIVER WITH MOTORIZED FLIP-OUT 7" (178mm) WIDESCREEN TOUCHSCREEN DIGITAL TFT MONITOR WITH DUAL (FRONT AND REAR) USB PORTS, SD MEMORY CARD PORT AND FRONT PANEL AV INPUT BV9982U IN-DASH DVD/MP3/CD AM/FM RECEIVER WITH MOTORIZED FLIP-OUT 7" (178mm) WIDESCREEN TOUCHSCREEN DIGITAL TFT MONITOR WITH DUAL (FRONT AND REAR) USB PORTS, SD MEMORY CARD PORT AND FRONT PANEL AV INPUT 09.
PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents 1. Before Operation...........................................................................................3 1.1 Glossary................................................................................................ 3 1.2 Precautions..................................................................................... .......3 1.3 Maintenance and Cleaning of Discs..........................................................4 1.4 Battery Information of the Remote Control............................
1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, It can playback interactive software with the menu displayed on monitor screen. If the disc contain still images, it can playback high definition of still images. Title Generally, the title is the important part of DVD disc.
1.3 Maintenance and Cleaning of Discs 6. Specification Disc Maintenance General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output............4 x 85W(measured at DC 14.4 V) Dimensions(w x h x d).....................................7”W x 2”H x 6.3”D DVD Deck Specification 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc.
1.5 The Remote Control Description 3 27 35 1 5. Trouble Shooting 1. TILT BU TTON 2. MENU BUTTON 14 4 3. POWER BU TTON 2 29 33 32 6 9 8 34 13 31 4. ^ BUTTON 5. >>| BUTTON 5 6. > BUTTON 7 7. |<< BUTTON 10 30 11 8. v BUTTON 12 9. SEL BUTTON 16 10. PLAY/PAUSE BUTTON 40 41 24 10+ 28 15 21 22 18 17 11. NUMBER(0~10,+10 -10) BUTTONS 12. 10+/PTY BUTTON 25 19 13. SETU P BUTTON 23 20 36 39 37 38 26 14. MODE BUTTON 15. APS BUTTON 16. SEARCH BUTTON 29. MU TE BUTTON 17.
1.6 The Locations and Names of Controls on or in the unit 18 * 19 23 5 22 3 20 1 4 Region Code Q: Why does the unit display REGION ERROR after inserting disc into disc compartment ? A: Because the DVD player and disc has respective region code. If the region codes of them do not match with each other, the DVD player can not play the disc.
1.7 Wires Connection Description The Description of the Wires Connection Fixing Screw Bolt * Parental Control Wiring Connecting Socket 1 Q:Why after inserting DVD disc in the disc slot, a dialogue window appears that asks to input a 4 digits password ? A:This is because the movie you are playing is rated with the Parental Control, and the current rating level of DVD player is lower than the current disc. You must change the Parent Control setting to higher rating level.
HUE It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 4.23.5 SPEAKER SETUP 1.8 UNIT INSTALLATION INSTALLATION INSTRUCTIONS TH E UNIT IS INS TALLED T O BE AN A NTI- THEF T ONE. T HE C HASSIS O F THE UNIT WEARS A SL IDIN G METAL HOUSING .
2. Common Operation 1. To turn on/off the unit In power off mode, short press any buttons except REL to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit. 4.23.2 LANGUAGE SETUP 2.
2. There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page. 3. Press the ^ or v button to select an setup item in the selected setup page. 4. Press the > button to enter the setup item. Then press the v or ^ button to select a desired mode of the setup item, finally press the OK button to confirm it. Press the < button to return to the upper level.
5. PRESET STATION [ 1-6 ] BUTTONS In RADIO mode: 1) To memorize the current frequency on the current band, press and hold any one of the six preset buttons (1-6) on remote control or rotate number knob and long press it . 2) To recall the preset memory on the current band, press one of the preset buttons [1-6] on remote control or rotate number knob and press it . 6. STEREO/MONO BUTTON Press the ST button on the remote control to select the STEREO or MONO sound mode for FM band. 7.
4.19 Program Playback It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play. 1 During playback, press the PROG button to enter a program interface as follows: When the AF switching mode is selected, the radio checks the signal strength of the AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minute for the strong station to a few seconds for the weak station.
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. : Tap it can pause playback : Tap it can stop playback . 4.16 Change the Caption Language :Tapping one of them can switch on between the speed levels of fast backward or forward. (Except image mode.) : Tapping one of them can select next or previous chapter/track.
4.11 Playback in Scan Mode 1. When playing VCD(PBC OFF)/CD , press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback. 4.2 Pause Playback When playing DVD/VCD/CD/MP3/WMA , press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 2. When playing DVD/MP3/WMA , the INT button is not available. 4.12 Playback from a specified chapter/track or a specified time 1.
2. Press the direction buttons to select your desired title, and then press the OK or PLAY button to open the root menu of the selected title. 3. Press the direction buttons to select your desired chapter, finally press the OK or PLAY button to play the selected chapter. During slow forward, press the PLAY button to resume normal playback. This function is only for video. 4.