AUDIO SYSTEMS BE1600.2 BE1600.4 Four Channel SAMOSET Car Audi Amplifier BE1500.1 jdt, BE2500.1 Amines Congratulations sn your purchase of a B03 EIFFEL Amplifier, it has bean designed, ginseng and manufactured to bring you the highest level of performance and quality, and wil afford you years of listening pleasure.
introduction with the B08 x ewE amplifier series, we are introducing four naw amplifiers, all designed in the USA. This new series includes two monotonic, one 2-channel, one 4-chains! amplifiers. Al BOSS models feature variable low pass and high pass {except mono block amps) crossovers and variable Input gain controls. For further flexibility in the use of a sub woofer, 01848 BE2500.1 $1248) Bass Boost control has bean included on all amplifiers.
Features Your new FE FFE amplifier features the following: « Glass AB Topology « Bridgeable outputs (Except BE1500.1 and BE2508.1) = SAMOSET PWM (Pulses Width Bolstered Power Supply « 201 sable stares operation with output power increase = Thelma! and speaker short protection » Soft turn-on recruit © Remote urn-conform-off circuit + Variable input gain control « Variable low pass filter « Fixed high pass Biter {Except BEI500.1 and BE2500.1) = Variable 0 to +1848 Bass Boost { BE1500.
General precautions Before installing and using your new BOSS amplifier, please becomes amplifier with all the information contained in this manual. Picasso keep this manual in a safe place for future reference. » Do not open or attempt to repair this unit yourself. Dangerous high voltages ars present which may result in pharisaic shock. Refer any repairs to a qualified service technician.
Connecting the amplifier Before doing any wiring, look through this manual and identify the diagrams te follow for power, input and speaker connections for your particular installation. Be sure you understand all the connections before you proceed. 1. Connect the power ground terminal to the closest point on the chassis of the car. Esp this ground wire to lees than 38° (100 om} in length. Use the same size gauge wire as the power wire. 2.
Low Level input Wiring Low-level (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performances. NOTE: io not connect BOTH the high level and low level insists from your veniremen fn your amplifier at the same time! 2-Channel Amplifier BE1600.2 anti oe signal 3 g IRE process 4-Channel Amplifier BE1600.
Low Level input Windbag Low-revel (RCA) input wiring is preferred for best audio performance. Always use a high-quality RCA cable for best audio performances. MOTE: Do not connect BOTH the Wok level and low level Inputs from your receiver in your amplifier af the sans time! Chockablock Amplifier BE1500.1 “9 Tos Such Utility of head Remote Sub woofer Control 5 8 nit or GE signal processor Bloodstock Amplifier BE2500.
High Level Input Wiring The high level input(s} should only be used when your head unit lacks RCA outputs. if the RCA outputs are not present, connect the speaker outputs from the receiver to the high level input connector of the amplifier. Be sure to observe polarity to avoid audio phase problems. NOTE: Do not connect BOTH the Bi level and low lave] inputs Frees your receiver fo your selfishness 81 the same Ural 2 Chance! Amplifier BE1600.2 Eee] We Speaker Terminals of head unit 4-Channel Amplifier BE1600.
High Level Input Wiring The high revel inputs) should only be used when your head unit lacks RCA outputs. If the RCA outputs ars not present, connect the speaker outputs from the receiver to the high level input connector of the amplifier. Bs sure to observe polarity to avoid audio phase problems. NOTE: Do ant cotes BOTH the bi love! and low level inputs from your receiver fo your pilferer at te same tonal Bone block Amplifier BE1506.1 Te Speaker Terminals Mono block Amplifier of head unit BE2500.
Troubleshooting if you experience operation or performance problems with this product, compare your installation with the satirical wiring diagram on the previous pages. if problems sparsity, read the following troubleshooting tips which may help eliminate the problems. SYMPTOM POSSIBLE REMEDY Amplifier will not | Check ko make sirs you have a good ground connection, Para up. Chock that the Remote Inge (Tran-Onj has af plats SVN.