User Manual

32
CAUTION
Connecons
Audio Pre-amp
Remote Out is 500 mA max output rang.
If several ampliers are to be used, it is
recommended to use a relay for the Remote
Out trigger.
Note
Subwoofer Pre-amp is a non-fading mono
output.
Note
Always run signal wires away from power
cables to reduce the possibility of noise.
Remote Out
+ 12 V DC
Max 500 mA
Front, Rear, Sub
2V Pre-amp Output
Note
If pre-amp outputs are being used exclusively,
turn O the internal amp of the product, to
reduce the possibility of noise entering the
signal chain.
See pg. 25
1
Locaon to plug in