6.
SPECIFICATIONS Power Requirements DC 12V Power Consumption 9W Screen Size 1 0 . 4 T F T- L C D Screen Format 4:3 Resolution Pixel 11 5 2 * 2 3 4 A/V Inputs AV 1 / V 2 I n p u t s Dimensions (L)12.5×(W)12.3×(H)2.2inch IR Power Requirements DC 12V IR Power Consumption 3W IR Transmitter Frequency Right 2.8MHz LCD Panel Type Active Matrix TFT Compatible video standard N T S C / PA L a u t o s e l e c t Left 2.
MONITOR OPERATION , USER S MANUAL Releasing the Monitor Push the open button (located on the front edge of the screen housing) a n d l o w e r t h e m o n i t o r t o t h e d e s i r e d a n g l e . Yo u c a n a l s o a d j u s t t h e , Please read this User s Manual in detail and use the set properly. swivel angle.
PRECAUTIONS A/V AND POWER CONNECTIONS , Please read and observe all warnings and instructions in this owner s manual and those marked on the unit. Retain this booklet for future reference.
FEATURES AND CONTROLS PRECAUTIONS CAUTION POWER Button MENU Button Right Dome Light Button Watching the monitor for an extended period of time with the engine turned off may deplete the vehicle， s battery. Quality installations are best performed by qualified and certified installers. This product is designed for operation with a 12 Volt DC, negative ground vehicle. It is not suitable for operation under other conditions or voltages. Don， t touch the unit if there is a flash of lightning.
INSTALLATION FEATURES AND CONTROLS 1. Open the packaging and check that these parts are present. Dome light INSTALLATION PLATE UNIT SCREW A SCREW B 2. Connect the external components to the RCA cable or AV output. (Refer to the connection diagram on page 8) Infrared Transmitter 3. Match the position of installation bracket and installation plate with screw A. Monitor (Front) 4. Secure the unit in place with the supplied screw B.
