BV7335B OWNER’S MANUAL Mobile Audio/Video System y 3.
CONTENTS SAFETY INFORMATION ................................................................... 3 DISC NOTES ..................................................................................... 5 INSTALLATION.................................................................................. 6 USING THE DETACHABLE FRONT PANEL .................................... 9 CONNECTIONS................................................................................. 10 LOCATIONS AND FUNCTION OF THE PLAYER ............
Use the Proper Power Supply This product is designed to operate with a 12 volt DC, negative ground battery system. Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player. Failure to observe this may cause malfunction due to the precise mechanism of this unit. Use Authorized Service Centers Do not attempt to disassemble or adjust this precision product. Please refer to the Service Center list included with this product for service assistance.
SAFETY INFORMATION CAUTION: MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS MOBILE DVD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND - DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DISC NOTES Handling and Cleaning y Dirt, dust, scratches and warping discs will cause wrong operation. y Do not place stickers or make scratches on discs. y Do not warp discs. y A disc should always be kept in its case when not in use to prevent from damage. y Do not place discs in the following places: 1. Direct sunlight. 2. Dirty, dusty and damp areas. 3. Near car heaters. 4. On the seats or dashboard. Disc Cleaning Use a dry soft cloth to wipe the surface.
INSTALLATION Notes: y Choose the mounting location where the unit will not interfere with the normal driving function of the driver. y Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. y Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION back of the unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your vehicle’s mounting area. Then use the supplied hardware (Tapping Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit.
INSTALLATION To fasten the unit to the factory radio 3. Press the release button to remove the front panel. 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard. mounting brackets. Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side.
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel 1. Press the release ( ) button, then the front panel will be folded down. 3. Note that if the front panel fails to lock in position properly, pressing control button may not function and the display may be missing some segments. Press the release button and then reinstall the front panel again. Release button OPEN 2.
CONNECTIONS Connector A 1. N.C 2. N.C 3. N.C 4. MEMORY +12V (YELLOW) 5. AUTO ANTENNA OUTPUT (BLUE) 6. N.C 7. +12V (TO IGNITION KEY) (RED) 8. GROUND (BLACK) Connector B 1. REAR RIGHT SPEAKER (+) (VIOLET) 2. REAR RIGHT SPEAKER (-) (VIOLET/BLACK) 3. FRONT RIGHT SPEAKER (+) (GRAY) 4. FRONT RIGHT SPEAKER (-) (GRAY/BLACK) 5. FRONT LEFT SPEAKER (+) (WHITE) 6. FRONT LEFT SPEAKER (-) (WHITE/BLACK) 7. REAR LEFT SPEAKER (+) (GREEN) 8.
LOCATIONS AND FUNCTION OF THE PLAYER Open the cover When the front panel is folded down: 13. MON/LOU/ 14. 1. (Release button) 2. Volume knob (when rotated) Push SEL (when pressed) 3. EQ/ (pick up phone) 15. 16. MODE 17. CLOCK 18. USB/SD cover 19. USB interface (hang up phone) 4. 3.2 inch TFT display 5. 1 6. 2 7. 3 OSD 8. 4 RPT 9. 5 RDM 10. 6 SUB-T 11. MUT 12. BAND/AMS/PAIR 20. Memory card interface 21. Remote Sensor 22. Disc slot 23. (eject) 24. RST (reset) 25. AV IN jack 26.
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 12
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL 1. 10. VOL+/VOLPress it to turn on the unit. When the Press to increase/decrease the unit is on, press it to turn the unit off. volume level. 2. MODE 11. PBC/ When the unit is on, press it to select It can be used to change between the different mode, such as RADIO, PBC ON and PBC OFF on the VCD DVD, USB, SD, AV IN mode. disc. For DVD disc, press to enter into the 3. BAND/SYS In radio mode, press it shortly to menu interface.
LOCATIONS AND FUNCTION OF THE REMOTE CONTROL buttons. 20. SLOW/PAIR In Bluetooth mode, press to input the icon. 26. GO TO/ GOTO (Disc search button) used in media play mode, cooperatively used with numeric buttons. For some discs, press to start slow forward function. Press it to enter the pair function for Bluetooth operation. 21. ZOOM/CLR Press to allow the picture to be increased in size. CLR button serves as back spaces key in Bluetooth operation. 22. SELECT Press to enter into the system setup menu.
OPERATION BASIC OPERATION BRIGHTNESS CONTRAST SHARTPNESS COLOR HUE RESET ◆ Turn the unit on/off When all the connection is finished, press MUT button on the front panel or on the remote control will turn the unit on. When the unit is on, hold press MUT button or press to turn the unit off. ◆ Fold down the front panel Press the release button on the front panel, the panel will be folding down.
OPERATION displayed on the screen. Pressing MUT button on the front panel or MUTE button on the remote control will mute the sound. Press it again will resume the sound. ◆ Brake function If the brake wire (pink wire) isn’t connected to the ground (when driving), the picture will not be shown on the screen in DVD/AUX mode for safety purpose. Only the audio will be heard. Note: Only when parking, the DVD/AUX picture can be seen on the screen. When driving, the warning information will be displayed.
OPERATION ◆ Pausing play ◆ DVD title menu & Menu play Shortly press on the front panel or on the remote control during playback to stop playback temporarily. Shortly press again will return to the normal playback. 1. When playing a DVD disc, pressing Title button on the remote control will stop the playback and return to the TITLE menu that is stored in DVD disc. The disc will be played automatically and stop at menu picture. 2.
OPERATION Note: The language is different according to the disc. Some discs only contain one subtitle language. MP3: REP:[OFF] REP:[REP 1] REP:[REP DIR] REP:[REP ALL] Note: REPEAT feature does not support VCD2.0 (with PBC ON). ◆ Play the tracks in random order For some discs, when playing, press RDM button on the front panel or on the remote control will play the tracks on the disc in shuffle order. In shuffle on mode, press RDM button again will exit shuffle playing.
OPERATION desired Title, Chapter or Time, then press OK button to confirm. FOR VCD (WITH PBC OFF)/CD/MP3: the unit will play the tracks you programmed. d) If you want to clear the program, select CLEAR on the screen and press OK on the remote control to confirm, and the unit will cancel the programmed play. For DVD disc: The operation is the same as VCD/CD operation.
OPERATION The language options are different depending on your country or region. 3) AUDIO SETUP When you open the AUDIO menu, you will see the following picture: SYSTEM SETUP TV SYSTEM AUTO PLAY VIDEO TV TYPE PASSWORD RATING DEFAULT AUDIO SETUP AUDIO OUT KEY * TV SYSTEM: Change the TV SYSTEM among NTSC, PAL and AUTO. * AUTO PLAY: Change between ON and OFF. When AUTO PLAY ON, the unit will skip over the DVD menu to play automatically.
OPERATION 2) Item: CH Function: Display the current chapter number and total chapter number. (This icon only displayed 3) Item: for several seconds, after several seconds it will disappeared.) Function: Display the played time of the current chapter. 4) C-: Display the remaining time of the current chapter. 5) T: Display the played time of the current title. 6) T-: Display the remaining time of the current title. 7) C: Display the played time of the current chapter.
OPERATION RADIO OPERATION the files in the USB driver and start to play automatically. ◆ Switching to Radio Mode Press MODE button on remote control or MODE on the front panel start radio mode. The band/frequency/station/clock and other information will display on the display. If in other mode, you can also press MODE button to select USB mode. When playing the audio/video/photo files in the device, the operation is the same with DVD operation described above.
OPERATION 1) Store in Memory Press and hold desired radio preset buttons (numeric buttons 1~6) on the remote control or on the front panel for several seconds, the memory icon will be shown display and the current listening station will be stored into the number button.
OPERATION ◆ Pairing and Connection remote control to clear it. Press and hold CLR button to clear all the numbers. You can also dial with the mobile phone directly. 1) Pressing PAIR button on the front panel of the unit or on the remote control to enter paring mode. On the mobile phone, select the Bluetooth set up. (Please refer to the instruction manual of your mobile phone on how to operate Bluetooth.) ◆ Transfer the Call between Mobile Phone and the Unit During the talking mode, you can press VOL TR.
TROUBLE SHOOTING If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked. with the video system. Replace the disc with one compatible with your video system. The desired source is not selected although you press the MODE button. ¾ An optional unit required to listen to each source is not connected yet. Connect the optional unit correctly. ¾ The reset button is not pressed yet although the optional unit has been connected to the unit.
TROUBLE SHOOTING The sound/picture skips on a DVD/VCD/CD/MP3. ¾ The disc is scratched or dirty. Clean the disc. A track will not play. ¾ Random play has been selected. Turn off random play. A VCD cannot be played using menus. ¾ The VCD disc being played is not compatible with PBC. Menu playback is available only with VCD discs recorded with PBC. The viewing angle cannot be changed. ¾ The DVD disc being played does not contain the recording of more than one angle.
SPECIFICATIONS GENERAL Power Supply Requirements Maximum Output Power Current Drain : DC 12 Volts, Negative Ground : 4x80 watts : 15 Ampere (max.) RADIO Sensitivity (S/N=30dB) FM 87.5 to 107.9 MHz(USA) 87.