PRECAUTION 7. Specification CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
6. The Trouble Shooting 1. Before Operation Please read the user s manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact the company or the technical service center authorized by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock. 1.
5.2 Dial with remote control with the following procedures: 1.3 Maintenance and Cleaning of Discs (1) Input telephone number with number buttons 0-9 Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc. If there is glue (or analog) on the disc surface, must wipe it up before using. 3.
1.5 The Remote Control Description 5. BLUE TOOTH HANDFREE SYSTEM 3 27 35 1 1. BACK BUTTON 1. Enter Bluetooth mode When you use MODE button or Mode Menu to enter Bluetooth mode, it will display Bluetooth interface as right. 14 4 2 29 32 Press and hold the BAND button to turn on shift then to do select. 9 34 Bluetooth interface 2. Pairing and connection 31 1) Turn on the Bluetooth mode of the mobile phone; 2) Select the item of Finding the Bluetooth Device and enter it.
1.6 Locations and Names of the Controls 1 15 16 5 2 4 INT 4 RDM 5 -10 4.27 The Region Code Q: Not begin to playback but to display REGION ERROR after inserting disc into disc compartment. Why ? 6- USB 3 RPT 3.6” TFT MODE 17 20 3 8 TA AF 1 9 BV7948B MU 7 14 11 6 A: Because the DVD player and disc has respective region code. If the region codes of them are not match with each other, the DVD player can not play the disc.
4.26 The Parental Control 1.7 Description of the Rear Cabinet BLACK GREEN SUBWOOFER RED R RED R BLACK BLACK Q:After inserting DVD disc into disc compartment, it will appear a dialogue window that ask me input a password of 4 digit. Why ? AV IN WHITE L YELLOW VIDEO FRONT RCA LINE OUT Fixing Screw Bolt BLACK BLACK NOTE * If you have not changed the password, the factory preset password for the DVD player will be empty.
The Description of the Fixed ISO Female Connector FUSE 10 A 4.25.6 DIGITAL SETUP CONNECTOR A 1. 2. 3. 4. Memory +12V 5. Auto Antenna 6. 7. 12V (To Ignition Key) 8. GROUND CONNECTOR B 1. Rear Right Speaker (+) 2. Rear Right Speaker (-) 3. Front Right Speaker (+) 4. Front Right Speaker (-) 5. Front Left Speaker (+) 6. Front Left Speaker (-) 7. Rear Left Speaker (+) 8. Rear Left Speaker (-) OP MODE It is for selecting audio output mode 1.
4.25.4 VIDEO SETUP 2. Common Operation 1. To turn on/off the unit Under power off mode, press the POWER button to turn on the unit. Under power on mode, press and hold the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the unit. BRIGHTNESS It is for adjusting the brightness of the video output. CONTRAST It is for adjusting the contrast of the video output. SATURATION It is for adjusting the saturation of the video output. HUE 2.
9. Return control When media playing, press the button to up to the previous menu, press menu to up to the previous menu till to the main menu.(When playing Video, please press stop button first) 4.25.2 LANGUAGE SETUP 10.
For the DVD System Menu, there are 6 setup pages in all. They display as follows: 3. Radio Operation 4.25 .1 SYSTEM SETUP 1. BAND BUTTON In RADIO mode, press the BAND button on the remote control or on the front panel to select your desired radio band of FM1, FM2, FM3, AM1 and AM2, and the selected band will be displayed on the small monitor of the front panel. 2.
7.
4.20 Program Playback 4. Basic Disc, USB or MMC/SD Operation It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD disc to play. 1 During playback, press the PROG button to enter a program interface as follows: 4.1 Begin playback 1. Press the POWER button briefly to turn on the DVD player. After turning on the DVD player, please turn on the monitor, and ensure that the video output of the monitor is the video input from the DVD player connected with the monitor.
Press and hold BAND to turn on SHIFT. ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. : select to pause playback. 4.17 Change the Caption Language : select to stop playback . :select one of them can switch on between the speed levels of fast backward or forward. (Except image mode.) Interface for MUSIC : select one of them can select next or previous chapter/track. 4.
4.12Playback in Scan Mode 1. In the state of VCD(PBC OFF)/CD disc playing, press the INT button to play the previous 15 seconds part of each track on the disc. Press the INT button again to resume normal playback. 4.2 Pause Playback In the state of DVD/VCD/CD/MP3/WMA disc playing, press the PAUSE button on IR remote controller to pause the playback, press the PLAY button to resume normal playback. 2. In the state of DVD/MP3/WMA disc playing, the INT button is not available. 4.3 Stop Playback 4.
During slow forward, press the PLAY button to resume normal playback. In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on TV screen if the disc include the PBC menu. 2. Press the number buttons to select your desired track to play. In MP3/WMA mode 1. The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available). 2.