Specifications

4. BLUETOOTH NOTICE
Before you start to use our Bluetooth HEAD UNIT , Please pair the unit with your mobile
phone completely. Please refer to the section of “PAIRING” To ensure the best reception for
Pairing & Re-connection, please make sure the phone Battery is fully charged when making
the pairing or Re-connection.
Every time you turn the ignition key from off to on, the unit will automatically re-connect with
the mobile phone.
By pressing the TALK button the unit will start the Auto-Reconnection . In some conditions,
the user will need to reconnect manually. For example like the following.
If the mobile phone is out of range. (2 meters away from the head unit) the unit will be
disconnected from the mobile phone.
If user wants to re-connect, it will have to be done manually.
LISTENING TO MUSIC USING CAR-AUDIO-HF ON THE BT AUDIO MODE
CAR-AUDIO-HF is capable of streaming music over Bluetooth from a mobile phone
supporting A2DP. Press the mode button to select Bluetooth BT audio mode, once you have
paired your Car Handsfree with your mobile phone, use your phone to play, pause, stop,
skip forward and backward. When you receive a call, the music will be automatically paused
and you will be able to answer or reject a call through the headset. Once you end a call, the
music will continue. On some phones you may have to press ‘play’ to start the music again.
And you can also make an outgoing call (This function is compatible with some phones
which can make outgoing calls during the A2DP mode.)
The Bluetooth symbol (...) and the connected symbol (< / >) on the mobile phone will be
different from one to another. Please refer lo the corresponding specification.
When you hang up the phone, the main unit will revert to previous state (radio, CD or other
mode).
When the main unit turns off (with ACC ON), if there is a call incoming, the main unit will
auto turn on and enter into talk mode. When hang up the phone, the main unit will turn off
automatically.
Some brand of Mobile Phone like Sony Ericsson may have "Power Saving Mode" selection
when Blueuooth mode is switched on. PLEASE DO NOT Switch ON “Power saving Mode”
when operating with this Head Unit, . As some abnormal communication behavior will
happen Power Saving Mode is switched on.
To ensure the best conversation quality / performance, please always keep talking within 1
meter of the Head Unit.
Some Mobile Phones can support “IN BAND RING TONE”, such as Motorola, Nokia. In
such case, the Incoming Ringing Tone will be same as the original Ring-tone of the Mobile
Phone. But some Mobile Phones like Sony Ericsson do not support this feature. The Ring-
tone will be using the standard Ring-tone of the Head unit.
Using voice dialing, please make sure the phone and the ‘head unit within 3 meters of each
other. Also please make sure your mobile phone support voice dialing function. And please
consult with your mobile phone supplier if you want to know the operation further about
voice dialing.
If user wants to Dis-connect the Head unit with the Mobile Phone, please click talk button
long once or switch "OFF" Bluetooth connectivity on the Mobile Phone.
E - 13