Specifications

ManualsBrandsBOSS Audio Systems ManualsCar & Vehicle ElectronicsBOSS Audio BV9364B Car Stereo DVD Player – Double Din, Bluetooth Audio and Hands Free Calling, 6.2 Inch Touchscreen LCD Monitor, MP3 Player, CD, DVD, USB Port, SD, AUX Input, AM/FM Radio Receiver

Touch screen Calibration

0415

1. POWER

Press once to switch on, press again to

switch off.

2. MUTE Button

Press once to turn off audio output,

press again to resume volume level.

Button

POWER ON/OFF

MUTE

SOURCE

SEEK+ / SEEK-

VOL+ / VOL-

SEL

LOUD

BAND / P / N

LOC / RDM

STOP

PLAY / PAUSE

ST / PROG

0-10+

DSP

AMS / RPT

TITLE

AUDIO

GO TO

SUBTITLE

PBC

UP / DOWN / L / R ENTER

SLOW

ANGLE

SETUP

OSD

ZOOM

Remote Control Operation

Step 1: Press the mode button in the unit to switch to DVD mode.

Please follow the below instructions to calibrate when there is no touch or

touch is not accurate.

Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in

picture (1). in the remote short, the unit will display as show in picture (2).

Picture ( 1 ) Picture ( 2 )

Step 3: Press “ ” in the remote as show in picture (3), the unit will display as show in

picture (4).

Picture ( 3 ) Picture ( 4 )

Step 4: Press “ ” button in the remote and then quickly press “ ” button as show in

picture (5) and you will enter the touch calibration interface as show in picture (6).

Picture ( 5 ) Picture ( 6 )

Step 5: Use the touch pen to touch top left corner, top right corner, down right corner,

down left corner, when the cross cursor stop at each corner, touch the center of the

cursor. Then the panel will display OK and leave the calibration interface and the unit

regained touch as show in picture (7).

Picture ( 7 )

3. SOURCE Button

Press this button to change mode.

4. EQ Button

Press this button to choose POP、ROCK、

CLASSIC、EQ off.

5. SEEK+ ( ) / SEEK- ( ) Button

In normal playback MP3、USB、SD songs,

Press this button to previous song or next

song.

6. VOL+ ( ) / VOL- ( )

Press this button to increase or decrease

volume level.

7. SEL Button

Press this button to choose sound feature.

8. LOUD Button

Press this button to startup LOUD function.

9. BAND-P/N Button

In radio mode, press this button to choose

band.

In VCD、DVD mode, press this button to

choose 、 or NTSC system.

10. LOC / RDM Button

In radio mode, press this button to switch

between local and direction.

In VCD、CD mode, press this key to

randomly play.

11. STOP Button

Press this button to stop playing.

12. PLAY / PAUSE Button

Press this button to switch between play

and pause.

In stop mode, press this button to play.

13. ST / PROG Button

In radio mode, press this button to choose

stereo or mono station.

In audio mode, it can help STOP button to

programmed play.

PAL AUTO