INSTRUCTIONS INSTRUCTIONS CONTENTS ACCESSORY Panel Introduction Basic Function Remote Control Operation Turn on/off Access main interface USB/SD Card Operation Radio Operation Disc Operation Play/Eject Disc DVD/VCD Disc Playback CD Disc Playback MP3/WMA Format Disc Playback Touch Menu BT Operation ST.
INSTRUCTIONS INSTRUCTIONS SPECIFICATIONS PANEL INTRODUCTION Power supply DC 12V Power range 10.8-16.0V DC Max Current Consumption 15A Ground system Negative ground Power Output 80 WattsX4 Channels FM tuner US frequency range 87.5-107.9MHz European frequency range 87.5-108MHz Signal / Noise ratio 55dB Stereo separation 30dB Search station volt 20-30dBuv AM tuner US frequency range European frequency range Limit noise sensitivity 530-1710KHz 522-1620KHz 32dB 1. PWR/VOL button 2.
BASIC FUNCTION WIRING DIAGRAM 1. PWR/VOL button Press this button will turn on power, during working longer press this button will turn off power, on any mode, shortly press will return main menu, rotate this button will adjust volume level. 2. MUTE button Press this button to shut off sound output, repress this button to resume sound output; Press this button longer to turn on/off TFT LCD display.
Touch screen Calibration Remote Control Operation Please follow the below instructions to calibrate when there is no touch or touch is not accurate. 28 3. SOURCE Button Press this button to change mode. Step 1: Press the mode button in the unit to switch to DVD mode. Step 2: Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in picture (1). in the remote short, the unit will display as show in picture (2). 4. EQ Button Press this button to choose POP、ROCK、 CLASSIC、EQ off. 5.
INSTRUCTIONS INSTRUCTIONS 14. 0-10+ Button Press this button to choose desired song、 section、preset stations. Decimal numbers, for example the 19th song, press 10+ and 9 button. 15. AMS / RPT Button In radio mode, press this button to browse stored stations. In audio mode, press this button to play repeatedly. 23. ANGLE Button In DVD mode, press this button to change play angle. 24. SETUP Button In audio mode, press this button to choose different set items.
Access setup interface Turn on/off Click [Setting] icon on main interface to access setup interface. When the ignition switch is put in ACC or ON position, Press [ ] button on the front panel to turn on the unit. After the host starts, hold [ ] button for 3 seconds, the host will turn off. General setting Click icon on setup interface to access general setting interface, as shown in below PIC 1 diagram: In general setting interface, you can select to turn on or turn off the existing functions.
Other Operation Radio Operation 1. Enter/exit Touch [Radio] icon in the main interface to enter into the radio interface. Touch icon to return to main interface, and then touch other function icons so as to exit radio mode. Rear view function In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car. 2. Band selection Click icon so as to switch among FM1, FM2, FM3, AM1, AM2 bands.
Disc Operation ST. Wheel setting 1. Click on the [ST. Wheel] icon in the main interface into the ST. Wheel settings interface. 2. The original vehicle to the control line positive, negative with the machine control line in the positive and negative connection. 3. Click the ST. Wheel buttons will appear corresponding operating tips, and fundamental operation prompts the ST. Wheel feature set. 4. Set function to save the settings and click the Confirm icon to confirm.
INSTRUCTIONS BT Operation Time setting Touch this button to access time setting interface. Stereo on/off Touch it so as to turn on/off stereo. Return to root menu Touch this icon, it shall return to root menu of disk in DVD state and access PBC menu playing in VCD state. All chapters in the disk shall be displayed on the interface, touch the chapter icon directly for playing. Access title menu Press this button to return to title menu of the disk.