User Manual

Panel Introduction
Sound setting
Touch【 】 icon can enter below menu:
◆EQ Touch【 】 icon can enter below menu:
Touch【 】 icon can set function's switch.
Touch【 】 icon can set BT default volume/unit start default volume.
Touch【 】 icon can set SUB/ Sub Phase/ Sub Freq/FAD/LOUD/BAL.
Touch【 】 icon can make all sound effect setting as initialization.
Up and down Slide the【 】icon to switch the EQ modes among EQ OFF—POP—ROCK—
EQ OFF.
Touch sound field【 】 icon can enter below menu:
Time Setting
Touch【 】icon can enter time setting interface.
Up and down sliding Year/Month/Date/Hour/Minute standard' number can set time needed.
Touch Time zone setting icon can enter time zone setting interface.
13 02
4
1
7
6
9
8
2
5
3
1.PWR/VOL/MUTEbutton
Press this button will turn on power, during working longer press this button will turn offpower,
on any mode, shortly press is MUTE function,rotate this button will adjust volume level.
2.NAVI button
Press this button to get into the GPS mode
3.MODE button
When the unit is power on,Repeat press this button can switch to different function mode as
following picture.
Note:When the device without connecting to USB\SD\DVD no disc inside,the system will
automatically skip these related working mode.
4.SD/GPS slot
.RST
.Dual(front and rear)USB
Insert SD/GPS card,the unit will play the files automatically.
5
Press this hole with a pointed tool, and the device shall restore to default settings after restarting.
6
Insert USB removable device so as to read audio/video files.
Warning :You can only use either
front or rear USB at a time. Never connect both front and rear USB at the same time! This could
cause malfunctions.
10