User Manual

④When the set function button is lighted, long press the corresponding button on car SWC,
K2 icon will be lighted after set successfully. as below picture
SWC setting
① Connect the SWC harness' positive& negative electrode from original car with car unit's harness
positive and negative electrode.
② In setting menu, touch 【 】icon enter SWC setting interface.
③Click the function button that need to be set, as below picture:【 】
⑤ 【 】
Touch icon can save setting.
If need reset function, click【 】icon, then the functions set before will be deleted.Then
repeat the above steps can reset corresponding functions.
Touch【 】icon can reset.
03 12
7.AUX
To input external audio.
Warning: You can only use either front or rear AUX at a time. Never connect both front and rear
AUX at the same time.
(Eject disc)
When there is a disc inside the unit, press the button can eject the disc.
8.IR
To receive infrared signal from the remote control.
9.
10.Disk load slot
Opening for disks to enter or retreat.